Manual AEG WSP 3010 (page 25 of 62) (English, German, Dutch, French)

464353

Zoom out

Zoom in

1/62

English

For the Fitter

2.4 Installation Site

The unit may not

– be operated in rooms where there is a risk of fire or explosion due to chemicals, dust, gases or

fumes;

– be operated in the immediate vicinity of pipes or containers which carry or contain inflammable

or explosive substances;

– be operated when the minimum distances from adjacent object surfaces are not kept.

In rooms in which exhaust fumes, oil and petrol smells occur, the unpleasant smell may linger and

could possibly cause soiling.

Installation wall

Check whether a wall of sufficient stability is available for fastening the unit.

If no suitable fastening wall is available, the unit must be fixed to the floor (screwed directly to the

floor or to another floor console [special accessory]).

Floors

The standing surface of the unit must be level and sufficiently stable so that the housing is not

deformed.

A temperature resistance of the fastening wall of at least 85 °C and of the floor of at least 80 °C

must be ensured. The units can be placed on any conventional floor but changes may occur in the

rail area on PVC, parquet and long pile carpeted floors under the influence of pressure and tem-

perature. In this case heat-resistant underlay tiles must be used (to be provided on site).

2.5 Unit Installation (fig. 3-14)

The storage heater must be secured by a wall or floor fixture (fig. 8) to meet the VDE standing

safety requirement.

The screws and plugs necessary for fixing the unit are not included in delivery. They must be

selected and provided by a qualified fitter depending on the respective wall material.

Wall fastening

There is a hole in the unit rear wall in the vicinity of the switching area through which a suitable

screw can be inserted for fixing to a sufficiently stable wall (fig. 8).

Before fixing the unit, make sure that the permissible minimum distances from adjacent objects

are kept.

Floor fastening

The unit is fixed to the floor by screwing the bottom of the unit to the floor through 4 9 mm holes

(see ”Technical Data”, page 9 for dimensions).

This type of fixture is only possible with the air outlet and inlet grilles and the fan drawer removed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG WSP 3010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG WSP 3010 Manual

Product: