Manual AEG WSP 300 H (page 28 of 76) (English, German, Dutch, French)

464372

Zoom out

Zoom in

1/76

For the Fitter

Fig. 4

Fig. 5

Note: Make sure that no connecting wires are damaged, removed or taken out of the

heater. Run the wires accordingly, so that this does not happen.

2.3.1 Opening the heater

1. Take out the 2 fixing screws at the top right and

left of the operating plate.

2. Take out the 4 fixing screws on the front cover

panel and remove the cover panel forwards.

Remove the equalising fascia plates on the rear

of the cover panel.

3. Push the operating panel upwards, then outwards

and remove it sideways.

4. Take out the 2 fan compartment fixing screws at

the bottom of the inside panel.

Remove the fan wiring from terminals 12 and N,

and earth on the connecting panel.

Remove the connecting wires of the room

temperature sensor B2 from the charge and

discharge control B1 (bottom right, near the fan

compartment) (take off the cable with 2 flat

spade connectors 2.8 – TF1 and TF2).

Unscrew the thermostat F4 from the inside panel.

If a day acting element (DAE) is installed, remove

the switching thermostat F2.1 from the inside

panel and take off the DAE connecting wires

from the control panel (remove wires to LH, N

and earth).

Pull out the fan compartment together with the

base board from the front of the heater.

2.3 Assembly and Electrical Connection

The heater should be only removed from its packaging near to its place of final assembly. Small

cracks or chips in the heater core bricks have no influence on the operation of the heater.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG WSP 300 H in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG WSP 300 H Manual

Product: