464406

AEG WKL 1003 Manual

15
Zoom out
Zoom in
Previous page
1/54
Next page
15
On installation of the heater in rooms with a bath and/or shower, the protection area to VDE 0100 part
701 as specified on the unit rating plate must be observed.
The unit must be mounted such that the switch and control units are out of reach of a person in the
bath or shower.
The mains connection cable may only be replaced with original spare parts by experts.
2.3 Installation
2.3.1 Installation of wall bracket
B
The wall bracket should be used as a template for fixing the appliance to the wall. It also helps to keep
the necessary ground clearance. To attach the unit proceed as follows:
I Place the wall bracket (5) holding the centre point horizontally on the ground and mark the holes a and
d on the assembly wall;
II
Raise the wall bracket so that the holes b in the wall bracket coincide with the marks just made on
the assembly wall;
Mark holes c and d on the wall bracket on the assembly wall;
At all four markings drill holes and attach the wall bracket to the wall using suitable fixing materials
(wall plugs and screws) dependig on the type of wall. The vertical slots allow adjustment for an offset in
the fixing holes.
2.3.2 Unit installation
C
The convector is mounted by attaching the slots on the rear simultaneously to the four tabs of the wall
bracket pressing down to lock. The closing bolt (6) of the wall bracket is then turned clockwise to the
stop, locking the fixing. To remove the convector, unscrew the locking bolt and lift the unit slightly,
pulling it forwards and out of the bracket.
2.4 Electrical connection
The required electrical connection is AC 230V.
For fixed connection, an earth socket or junction box should be installed at a distance of
at least 100 mm to the side of the heater.
2.5 Handover
Explain to the user how the unit functions. Draw his attention in particular to the safety instructions.
Give the user these operating and usage instructions.
for the user and the professional installer
English
3. Guarantee
For guarantees please refer to the respective terms and conditions of supply for your country.
The installation, electrical connection and first operation of this appliance should be carried out by a
qualified installer.
The company does not accept liability for failure of any goods supplied which accor-dance with the
manufacturer‘s instructions.
3.1 Environment and recycling
Recycling of obselete appliances
Appliances with this label must not be disposed off with the general waste. They must be coll-
ected separately and disposed off according to local regulations.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WKL 1003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WKL 1003 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info