Manual AEG WKL 1003 (page 14 of 54) (English, German, Dutch, French, Polish, Spanish)

464406

Zoom out

Zoom in

1/54

for the professional installer

2. Installation instructions

This unit may only be erected and electrically connected by a specialist following the installation

instructions.

First remove the packaging and check accessories and any enclosures, ensure that no accessories remain

in the packaging material.

2.1 Structure of unit

4 Air outlet grid

5 Wall bracket

6 Closing bolt

7 Mains connection cable

8 Rating plate

Technical data

Type WKL503S

WKL503U

WKL753S

WKL753U

WKL1003S

WKL1003U

WKL1503S

WKL1503U

WKL2003S

WKL2003U

WKL2503S

WKL2503U

WKL3003S

WKL3003U

Height mm 450

Width mm 370 445 445 590 740 890 1040

Depth

with wall bracket

100

Dimension A mm 121 195 195 343 491 639 787

Weight kg 4,0 4,6 4,6 6,0 7,2 8,4 9,9

Connection 1/N ~ 230 V

Power kW 0,5 0,75 1,0 1,5 2,0 2,5 3,0

Temperature

adjustment range

ºC approx. 6 to 30

Frost protection ºC approx. 6

Protection class II

Protection mode IP 24, splash water protected

Approval see unit rating palte

2.2 Provisions and specification

The unit should not be operated

– inroomsatriskofexplosionorfirefromchemicals,dust,gasorvapour,

– intheimmediatevicinityofpipesorcontainerswhichtransportorcontainflammableor

explosive substances,

– iftheminimumdistancesfromadjacentobjectsurfacesarenotobserved.

In workshops or other rooms in which exhaust gases, oil or petrol vapours etc. occur or where solvents

and chemicals are used, persistent odour problems and where applicable contamination can occur.

 The unit may only be fitted to a vertical wall, temperature-resistant up to at least 80 °C.

 Minimum distances from adjacent object surfaces must be observed.

 All electrical connection and installation work must be performed to VDE regulations (0100), the regula-

tions of a competent utility company and the corresponding national and regional regulations.

 The unit must not be mounted directly below a wall socket.

 If the unit is permanently connected to an AC network (junction box) an isolation distance of

at least 3mm is required on all poles for isolation from the network. For this, circuit breakers,

LS switches, fuses etc. can be used.

Installation with permanent connection cables is not permitted.

 The rating plate must be observed. The rated voltage must correspond to the nominal voltage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG WKL 1003 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG WKL 1003 Manual

Product: