518229
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
tPress
and / to select your desired language.
tPress
to confirm.
10.13 Change the System PIN
A 4-digit system PIN code is used for changing the system settings of the base station, and is used to
protect your phone from unauthorised use. The default system PIN code is 0000.
tPress
and / to select “SETTINGS“.
tPress
and / to select “CHANGE PIN“.
tPress
and display will show “PIN?”, enter the 4-digit PIN (default setting is 0000) and press .
tThe display will show “NEW PIN”, enter the new PIN and press
.
tThe display will show “REPEAT”, enter the new PIN again, and press
to confirm.
Note:
If the incorrect PIN is entered or the new PIN is not entered twice the same, an error tone will be emitted and
it will return to the previous menu. If this takes a short time, press
to return to the menu immediately.
10.14 Base default
You can reset all of your base settings to their default settings. After a reset, all your personal base settings,
call list entries, redial list entries, direct memory entries, and answering messages will be deleted, but any
phonebook entries will be kept:
tPress
and / to select “SETTINGS“.
tPress
and / to select “BS DEFAULT“.
tPress
and display will show “PIN?”, enter the 4-digit PIN (default setting is 0000).
tPress
to confirm, and base will return to the previous menu.
11 HANDSET REGISTRATION
Important:
When you purchase your phone system, all cordless handsets are already registered to your base, so you
do not need to register them.
Handset registration is only necessary when you buy extra cordless handsets or if a cordless handset has
become faulty.
You can register additional cordless handsets to have up to 5 handsets per base unit, with each handset’s
number (1 to 5) shown on its display.
A cordless handset can be registered to only one base at a time.
To check whether a handset is registered, make sure mains power to the base unit is switched on and the
handset is within range. The handset’s display should show its number and the
icon should be steadily
on. If the display shows “REGISTER ”, you need to register the handset again using the following process:
tOn the base station, press
and / to show “REGISTRATION“, and then press to put the base
station into registration mode. The base display will show “PLEASE WAIT” and the base will stay in
registration mode for about 2 minutes, so the following handset sequence must be completed within
this time.
tPress
and / to select “REGISTRATION“.
tPress
to display “PIN?----“.
tEnter the 4-digit system PIN (default is 0000).
tPress
to confirm, and the display will show “PLEASE WAIT“ flashing.
If the handset registration is successful, the display will change to standby mode with the new handset
number and the
icon will stop flashing.
The handset will automatically be allocated the next available handset number. If the handset registration
is unsuccessful, the
icon will still flash.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Voxtel D210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Voxtel D210 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Voxtel D210

AEG Voxtel D210 Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 160 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info