135582
71
Zoom out
Zoom in
Previous page
1/80
Next page
7
EN
To Select a Desired Channel
You can select a desired channel by using CHANNEL (o/p), or
directly pressing the
number buttons on the remote control.
Enter a channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press 0
and
6. If you only press 6, channel 6 will be selected after a
brief delay.
You can only select channels 1–99.
Manual Channel Preset
Use the remote control for this procedure.
1) Press
MENU.
2) Press
PLAY/o or STOP/L to select “INITIAL”, then press
F.FWD/B.
3) Press
PLAY/o or STOP/L to select “CH TUNING”, then
press
F.FWD/B.
4) Press
PLAY/o or STOP/L to select “MANUAL”, then
press
F.FWD/B.
5) Press
PLAY/o or STOP/L to select “POSITION”, then
press
F.FWD/B.
When a weak signal is received in Manual Tuning mode,
you can change the background to solid blue or the
static screen by pressing
TAPE COUNTER RESET.
6) Press the
number buttons, PLAY/o, or STOP/L to select
your desired position number, then press
F.FWD/B.
You can select position number 01-99.
If [ON] appears on the right side of “SKIP”, press
PLAY/o or STOP/L to point to “SKIP”. Then, press
F.FWD/B to select [OFF].
If you want to remove scrambled signals, press
PLAY/o
or
STOP/L repeatedly to point to “DECODER”. Then,
press
F.FWD/B to select [ON].
7) Press
PLAY/o or STOP/L to select “CHANNEL”, then
press
F.FWD/B.
Press
PLAY/o or STOP/L. The VCR tuner will begin to
search up or down automatically. When a channel is
found, the VCR will stop searching and the picture will
appear on the TV Screen.
You can select desired channel number by using
the
number buttons. You must refer to the following
Channel Plan table and press three digits to select the
channel number.
(To select channel 24, press “
0” button first and then
press “
2” and “4”.)
If this is the channel you want, press
F.FWD/B.
This VCR can receive Hyper and Oscar frequency bands.
8) Press
MENU to exit.
Note: To confirm that a channel has been added, press
CHANNEL (o/p).
To Skip a Preset Channel
The channels you can no longer receive or seldom watch can
be set to be skipped when you access channels by pressing
CHANNEL (o/p).
Use the remote control for this procedure.
1) Press
MENU.
2) Press
PLAY/o or STOP/L to select “INITIAL”, then press
F.FWD/B.
3) Press
PLAY/o or STOP/L to select “CH TUNING”, then
press
F.FWD/B.
4) Press
PLAY/o or STOP/L to select “MANUAL”, then
press
F.FWD/B.
5) Press
PLAY/o or STOP/L to select “POSITION”, then
press
F.FWD/B.
6) Press the
number buttons, PLAY/o, or STOP/L to select
relevant position number, then press
F.FWD/B.
7) Press
PLAY/o or STOP/L to select “SKIP”, then press
F.FWD/B to select [ON].
To memorize the channel again, press
F.FWD/B. “ON”
will change to “OFF”.
8) Press MENU to exit.
Note: To confirm that a channel has been deleted, press
CHANNEL (o/p).
Channel Plan
CH Indication TV Channel
02 – 12 E2 – E12
13 – 20 A – H (only ITALY)
21 – 69 E21 – E69
74 – 78 X, Y, Z, Z+1, Z+2
80 – 99,100 S1 – S20,GAP
121 – 141 S21 – S41
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P08
008
[OFF]
[OFF]
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P08
008
[OFF]
[ON]
CH TUNING
AUTO
MANUAL
MOVE
MENU
TIMER
SET UP
INITIAL
HG210ED(EN).fm Page 7 Tuesday, March 2, 2004 4:08 PM
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG vcr 4505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG vcr 4505 in the language / languages: German as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info