Manual AEG ste 500 (page 4 of 82) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish)

382754

Zoom out

Zoom in

1/82

ENGLISH

ST 500, STE 500, STEP 500

Always disconnect the plug from the socket before carrying out any work on the

machine.

1. Slide the transparent cover downwards,

then the clamping screw is more

accessible.

2. Loosen the clamping screw about 2

revolutions by means of the hexagonal

allen key (fitted into the base plate).

3. Fit the saw blade into the groove of the support roller

and push it firmly into the plunger as far as it will go;

the lug of the saw blade must contact the end of the

plunger (see illustration).

4. Retighten the clamping screw.

5. Check that the saw blade is sitting firmly (wear

protective gloves!).

The base plate can be tilted or moved

backward or forward.

Setting an angle

For angle cuts and

bevels.

Loosen the fixing screw, pull the base

plate out of the mounting, set it at the

required angle (15

, 30

, 45

), push it

back into the mounting and tighten the

fixing screw again. Angles other than 45

can be set by not pushing the base plate

back into the mounting.

The angle can be read off the scale.

For very exact angle cuts it is

recommended to make a test cut.

Moving the base plate

For plunge cuts or cuts in corners.

Loosen the fixing screw, push the base plate to the rear and tighten the fixing

screw again. The base plate in this position is fixed at the 0

setting.

Moving back

For cutting a hole with a short saw blade and sawing near the

edge.

Take the fixing screw out, push the base plate to the rear and screw the fixing

screw tightly into the rear hole.

In this position the base plate can also be off-set in longitudinal direction.

Only operate the machine with suitable

sawdust removal.

The integrated suction channel has the

standardized internal diameter of 30 mm.

Use the suction hose (Id. No.

4932 3304 12) from our range of

accessories to connect it to a household

vacuum cleaner or to an wet-and-dry

vacuum cleaner.

Inserting the

saw-blade

Adjusting the

base plate

Sawdust removal

274315

My jigsaw just when “bang” & blew the house fuse. Having opened it up a component looks blown- white cylinder 2 ohms mark & lots of other numbers& letters - is it repairable??
Steve stevemaylor@sky.com Submitted on 10-2-2020 at 18:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG ste 500 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 3,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG ste 500 Manual

Product: