Manual AEG SRC 4438 (page 44 of 50) (English, German, Dutch, French, Italian, Spanish)

482890

Zoom out

Zoom in

1/50

ENGLISH

Set Alarm on the Device

If not using the “iDock Speaker” App in your iPod touch or

iPhone the alarm time must be set manually on the device.

You can set two alarm times; proceed as follows:

• Press and hold the ALARM button (10). The display

shows the currently set rst alarm time. The display

shows “ ”. The hours ash.

NOTE:

Press the ALARM button again to set the second alarm

time. The display shows “ “. The hours start ashing.

• Press the SET-/ SET+ buttons to set the hours.

Press the /ENTER button to conrm. The minutes

ash.

• Set the minutes, press the SET-/ SET+ buttons.

Press the /ENTER button to conrm.

• Using the SET-/ SET+ buttons, select how you

want to be woken. Conrm your selection with the

/ENTER button.

The following options are available:

- “BUZ” (Buzzer):

An alarm sounds when the wake-up time is

reached.

- “FM” (Radio):

As soon as your set wake-up time is reached, the

radio switches on. The last set channel will play. The

volume increases slowly.

- “IP”:

CAUTION:

Before plugging in the iPod/iPhone, make sure

that the radio is not in iPod mode.

• Insert the adaptor supplied for your iPod touch/

iPhone in the dock (14). You can only ensure

that the iPod ts correctly into the iPod/iPhone

port if the adapter is plugged in.

• Insert your iPod touch or iPhone in the dock (14).

CAUTION:

Make sure that your iPod/iPhone is plugged up-

right into the port. Do not bend or tilt the iPod/

iPhone whilst it is plugged into the port. This may

lead to the port/iPod/iPhone being damaged.

• Playback from your iPod/iPhone starts in the

set mode at the set alarm time. The volume

increases slowly.

NOTE:

• Follow your iPod/iPhone manual to select the

desired mode.

• If no iPod/iPhone is connected the device

wakes you in BUZZER mode.

• Press the ALARM button once or twice, the indicators

“ “ or “ “ appears on the display. The rst or second

wake-up time is active.

• Switch the unit onto Standby Mode using the

/ALARM RESET button (4).

NOTE:

• With docked iPod touch/iPhone and activated App

setting the alarm-function can only be used in iPod

mode.

• Previous alarm times which have been set manually

are overwritten with the iPod/iPhone data if iPod/

iPhone with activated App is docked.

Turn O Alarm

Press the /ALARM RESET button to turn o the alarm

until the next day.

Snooze Function

Press the SNOOZE/DIMMER button (3) to deactivate the

alarm for approx.10 minutes. The “ “ and “ “ icons

respectively start ashing on the display.

Deactivate Alarm

To deactivate the alarm time repeatedly press the ALARM

button (6) until the display (Fig. 2/9) disappears.

Sleep Timer (SLEEP button (12))

During ON mode you can set the automatic sleep timer

in 00-minute steps between 90 and 10 minutes; after this

period of time the device turns into standby mode. Press

and hold the button for approx. 3 seconds. The display

shows “ “ and “00” starts ashing. Press the SET-/

SET+ buttons (9) until the desired snooze time is dis-

played. Press the /ENTER button (8) to conrm. “ “

is displayed if the function is activated. After the set time

the device automatically turns o.

Press the /ALARM RESET button (4) to deactivate this

function again.

Music Playback from iPod/iPhone

(iPod/iPhone not supplied)

CAUTION:

Before plugging in the iPod/iPhone, make sure that the

radio is not in iPod mode.

1. Insert the adaptor supplied for your iPod touch/iPhone

in the dock (14). You can only ensure that the iPod ts

correctly into the iPod/iPhone port if the adapter is

plugged in.

2. Connect your iPod/iPhone to the iPod dock (14).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG SRC 4438 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG SRC 4438 Manual

Product: