464374
13
Zoom out
Zoom in
Previous page
1/26
Next page
13
English
For the Fitter
Fix the sensor unit to the right hand side panel.
The capillary sensor should be threaded through
the heat protection plate and front the inside
through the side panel (Fig. 4). Push the capillary
sensor bulb into the bracket in the plastic
housing.
Screw the plastic housing (outer side panel), heat
protection plate and strain relief together. Use
the 2.9x9.5 screws provided for this purpose
(Fig. 4).
Fix the strain relief to the heater using the fixing
screw of the strain relief on the fan drawer
(Fig. 4).
Fig. 4 Heat protection plate and strain relief
B2 Integral room thermostat
E2 Day-acting element
F2.1 Thermal release thermostat
F2.2 Safety thermostat
F3 Fan safety cut-out
M1 Fans
R2 Fan compensatory resistance
R3.1 Accelerator resistance for room thermostat
R3.2 Night set-back resistance
S
Z
Illuminated rocker switch for day-acting
element
TA Reducing the room temperature by 3 K
Connection cable
1/N/PE ~ 230V
Additional
circuit:
Integral
thermo-
mechanical
room
thermostat
We reserve the right to make any technical changes.
The AEG Conditions of Guarantee apply.
These are to be found in the instructions supplied with the heater.
Connect the cables of the adapter for the rocker switch to the capillary tube sensor and the
panel board terminals according to circuit diagram.
Push on the adapter for the rock switch with 3 connecting cables from interior through the
opening in the front panel to the rocker switch (wide connections on top, narrow connections on
the bottom). Push against the rocker switch to avoid that it snaps out of the plastic fascia plate.
Connect the insulated flat connector to the free plug connection of the Rti M HF controller.
Connect the cables from capillary-tube thermostat to the terminal strip according to the circuit
diagram.
Set in plastic fascia plate with illuminated rocker switch from the front into the opening on the
front panel.
Close the heater back up.
Attention: A minimum clearance of 10cm between the right-hand side panel and the wall
of the room to be heated must be kept. The air slits in the side panel must not
be covered by any objects.
2.4 Circuit Diagram
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG RTi 600 M HF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG RTi 600 M HF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info