483228

AEG PW 4916 FA Manual

52
Zoom out
Zoom in
Previous page
1/92
Next page
52
GB
Display and Error Messages
General
If an error message (Err) appears in the dis-
play please wait until the scales switch off.
Then switch them on again to continue using
them. For a complete reset remove the battery
for a moment and then reconnect it.
Messages
• 0.0 kg, 0.0 lb., The weight to be
0: 0 st:lb: measured is too low.
Correct operation is not
possible.
• „Err2“: The calculated body fat/
water percentage ranges
beyond the upper or lower
measuring limit.
• „Err2“: The measurement was
aborted before the measur-
ing process was completed
or it was not possible to
perform measuring.
• „Err“: The indication ‘Err’ (Error)
means that the weight
exceeds 180 kg. Do not
exceed the device’s maxi-
mum load to prevent
damages to the device and
the sensors.
- Place the scales on a flat
and solid surface.
• „LO“: The battery charge is too
low.
Usage and care tips
• Weigh yourself without any clothes or
shoes on before meals and always at the
same hour of the day.
• The balance rounds off weight to the
closest 100 g.
• If you weigh yourself twice and two diffe-
rent values are given, it means that your
weight is comprised between both values.
• Do not immerse the balance in water: the
electronic components can be damaged.
• Remove the batteries if the scales will not
be used for a longer period of time.
• Handle the balance with care, as it is a
precise measuring instrument. Do not drop
it or jump on it.
• Do not load the appliance with more than
180 kg (396,8 lb. / 28,34 st:lb) to
avoid damaging the device.
Cleaning
• Clean the device with a slightly moist
cloth. Make sure that no humidity or
waters seeps into the device!
• Do not use abrasive detergents! These
can damage the casing of the device!
• Use a commercially sold detergent or soap
for cleaning.
• Dry the device well after cleaning with a
dry and soft cloth.
This device has been tested according to
all relevant current CE guidelines, such as
electromagnetic compatibility and low vol-
tage directives, and has been constructed
in accordance with the latest safety regula-
tions. Subject to technical changes without
prior notice!
Technical data
Model: PW 4916 FA
Power supply: 3 x 1.5 V, Typ AAA,
LR03, AM4
Min. / max.
weight load: 0.5 kg
(1,1 lb. / 0,1 st:lb)
– 180 kg (396,8 lb. /
28:34 st:lb)
Net weight of the
scales: 1.85 kg
PW_4916_Bed_Anl_A5_3.qxd 09.10.2007 17:06 Uhr Seite 52
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG PW 4916 FA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG PW 4916 FA in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info