Manual AEG OKO-LAVAMAT BELLA 2100 (page 43 of 45) (English)

458176

Zoom out

Zoom in

1/45

Unscrew the two plastic screws (4 - Fig. A) and fit them on the oppo-

site side (4 - Fig. B).

Remove the catch hook (5 - Fig. A) by inserting a screwdriver into the

upper hole and pushing downwards.

Remove plate (6) by inserting a screwdriver into the bottom hole and

pushing upwards (Fig. A).

Refit the catch hook (5) and plate (6) on the opposite sides (Fig. B).

Remove the door catch (7) and plate (8) as explained in paragraph 7.

Turn the door 180°.

Refit the door catch (7) and plate (8), reversing their position and

pressing firmly to engage the hook (Fig. B).

Fit the door onto the machine. Insert the top pin first, then the bot-

tom pin into the hinge (3- Fig. B); finally screw the hinge onto the

washing machine.

Check that the door is aligned with the appliance. To do this, loosen

screw (9 - Fig. B) by a couple of turns and re-tighten when alignment

is correct.

Fit the flexible end of the door catch (1 - Fig. B) into the location

provided in the door.

Fitting a door panel

The door of this machine has mouldings to allow fitting of a decorati-

ve panel (stainless steel sheet, laminated plastic, wood etc.) to match

with the existing kitchen units.

The dimensions of the panel must be as follows:

Width 588 mm

Height 588 mm

Maximum thickness 4 mm

To fit the panel, remove the moulding by unscrewing its fixing screws.

Position the panel, then refit the moulding, making sure that it comes

into contact with and firmly clamps the panel.

Installation

132998960.qxd 7/11/02 9:24 AM Pagina 43 (Nero/Process Black pellicola)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG OKO-LAVAMAT BELLA 2100 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG OKO-LAVAMAT BELLA 2100

AEG OKO-LAVAMAT BELLA 2100 Manual - Dutch - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info