458176
42
Zoom out
Zoom in
Previous page
1/45
Next page
42
Permanent connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This operation must be performed by a qualified electrician.
Important: The power supply cable must be easily accessible after
installing the machine.
Door reversal
The opening direction of the outer door on this machine can be rever-
sed. To carry out this operation, proceed as follows:
Disengage the end of the
catch (1) from the door
and turn it 90° to
remove it from its seat
(Fig. A).
Using a screwdriver, turn
plastic plug (2) 90° to
remove it from its seat
(Fig. A).
Fit plug (2) in the hole
left free by catch (1) and
turn it 90° to lock it in
place (Fig. B).
Fit catch (1) into the
hole from which plug (2)
was removed and turn it
90°, making sure that
the latching tooth is fac-
ing towards the right
(Fig. B).
Remove the door by
unscrewing the screws
securing it to the bottom hinge (3 - Fig. A).
Installation
7
4
2
39
1
8
6
5
Fig. A
5
4
2
39
1
7
8
6
Fig. B
132998960.qxd 7/11/02 9:24 AM Pagina 42 (Nero/Process Black pellicola)
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG OKO-LAVAMAT BELLA 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG OKO-LAVAMAT BELLA 2100 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG OKO-LAVAMAT BELLA 2100

AEG OKO-LAVAMAT BELLA 2100 Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info