Manual AEG of 500 s (page 6 of 83) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish)

426976

Zoom out

Zoom in

1/83

ENGLISH

OF 500 S, OFE 710

Push the plastic protection into base plate

as shown in illustration.

Loosen the clamping screw of the motor

part and remove it from the cage.

Fix the motor part in the machine holder

(Order No. 4932 3192 27) and fasten the

machine holder on the workbench. The

machine can also be fixed with the screw

clamp (Order No. 4932 3018 06).

Fix the flexible shaft in the collet and

tighten the tension nut.

The machine has a max. speed of rotation of 34 000 min

–1

. Therefore only use the

ball–bearing AEG flexible shaft (Order No. see above).

For cutting shapes to a pattern (B)

the guide bearings (A) must be

screwed onto the base plate.

For outer contours the pattern (B)

must be smaller by measurement

(C), on inner contours it must be

bigger than the workpiece.

Further guide sleeves with an outer

diameter of 25–40 mm can be

obtained as accessory.

Unscrew the guide bars from the rip fence

and screw onto the curve gauge.

Push the shaft into oneof the drill holes for

the rip fence.Set the radius between the

central point and profile cutter and tighten

the capstan-head screw.

Mounting the

plastic protection

(Accessory*

Part number:

4932 3117 22)

Mounting the

flexible shaft

(Accessory*

Part number:

4932 3300 00)

Copying device

(Accessory*

Part number:

4932 2499 77)

Curve Gauge

(Accessory*

Part number:

4932 3132 74)

Circular Guide

(Accessory*

Part number:

4932 2499 80)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG of 500 s in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 4,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG of 500 s Manual

Product: