426976

AEG of 500 s Manual

5
Zoom out
Zoom in
Previous page
1/83
Next page
4
ENGLISH
OF 500 S, OFE 710
1. Lower cage until the router cutter
touches the workpiece , and
tighten clamping lever .
2. Lower the depth gauge onto the required
screw of the revolving depth gauge.
3. Pick value off the scale, add required
routing depth, and set depth gauge at
estimated value .
4. Loosen clamping lever, lower cage to
depth gauge and re–tighten clamping
lever.
It is advisable to cut in stages for larger cutting depths or larger cutter diameters.
Three cutting depths can be set with the screws on the revolving depth gauge:
1. Set required cutting depths as described above, and set the depth gauge on the
shortest screw (lowest cutting level).
2. Set the first two cutting depths on the longer screws. Tighten screws again and
secure with the locking nuts against distorting.
3. For cutting, lower the cage to the longest screw and tighten. Turn the depth gauge
each time after cutting.
A = lowest r.p.m.
G = largest r.p.m.
Under the effect of extreme electromagnetic
interferences from the outside, tempo–rary variations in
the speed of rotation could arise in particular cases.
4–16
18–36
HM
HSS
4–20
22–36
HSS
HM
G
F–G
E
F
G
–
–
F
E–F
D–E
C–D
D–E
Router ø
in mm
Router
working
material
Soft wood Panels
made of
wood chips
Plastic,
Perspex
Switching on:
Slide back the On/Off switch. To lock,
depress the front part of the sliding switch.
Switching off:
To unlock, depress the back part of the
sliding switch. The switch will automatically
move back to ”0”.
Setting of routing
depth
Revolving depth
gauge
Setting speed of
rotation
(only applicable for
OFE 710).
Table for
electronic
settings
On-/off switch
1
2
OFE
630
electronic
OFE
630
electronic
2
1
OFE
630
electronic
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG of 500 s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG of 500 s in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info