515890
38
Zoom out
Zoom in
Previous page
1/164
Next page
39 GB
Start-up / Operation
MISFIRE Misfire Monitoring – Monitoring of
misfire and ignition failures
FUEL Fuel System Monitoring – Monitoring
of the fuel-air-ratio
CCM Comprehensive Component Monitoring
– Monitoring of the exhaust relevant
components in the vehicle
CAT Catalyst Monitoring – Monitoring of
the catalytic converter
HCM Heated Catalyst Monitoring – Moni-
toring of the heated catalyst
EVAP Evaporative System Monitoring –
Monitoring of the evaporative -emis-
sions-system
2AIR Secondary Air Monitoring – Monitoring
of the secondary air system
A / C A / C System Monitoring Monitoring
of the air-conditioning system
O2S O2 Sensor Monitoring – Monitoring of
the lambda sensor
HO2S O2 Sensor Heater Monitoring – Moni-
toring of the pre- and post connected
(HO2S) lambda sensors
EGR EGR System Monitoring – Monitoring
of the exhaust gas recirculation
system
After completion of the control program, the
probable error codes are displayed.
The following errors or additional information
can occur with the program »3.IM«:
YES All control programs, which the vehicle
supports, have passed the separate
diagnosis tests and the warning light
MIL is off.
NO Not all control programs (at least 1)
have completed the diagnosis test
and / or the warning light is on.
READY Shows that a specific control program
has carried out the respective diagno-
sis test.
NOT RDY (NOT READY) A specific control pro-
gram has not carried out the diagnosis
test.
N / A This control program is not supported
by the vehicle.
-> (flashing arrow to the right)
The following information can be
called up in the LC-Display
1
. Press
the button LÖSCHEN / ERASE
2
to
call up the information.
<- (flashing arrow to the left).
The previous information is available
on the LC-Display
1
. Press the button
LESEN / READ
3
to call up the infor-
mation.
j Press the button LESEN / READ
3
to go back
to the main menu.
Menu function read Vehicle
Identification Number (VIN)
With the menu function »4.VIN« (Vehicle Identi-
fication Number) the chassis number of the vehicle
can be called up. This is possible for vehicles built
as from year 2002, which support the mode 9.
1. Select the menu »MENU 4.VIN« by pressing
the button LÖSCHEN / ERASE
2
. If the vehi-
cle does not support this function »NOT
SUPPORT« appears in the LC-display
1
.
2. Press the button LÖSCHEN / ERASE
2
. You
can now read the 17 digit vehicle identifica-
tion number.
Note: A flashing arrow to the right indicates
that more digits of the vehicle identification
number can be called up. See these by press-
ing the button LÖSCHEN / ERASE
2
. A flash-
ing arrow to the left indicates that more
digits of the vehicle identification number
can be called up. See these by pressing the
button LÖSCHEN / ERASE
2
.
j Press the button LESEN / READ
3
, to go
back to the main menu.
Menu function rescanning
With the menu function »5.RESCAN« the main
data stored in the control unit can be retrieved.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG OBD II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG OBD II in the language / languages: English, German, French as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG OBD II

AEG OBD II User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info