565732
17
Zoom out
Zoom in
Previous page
1/48
Next page
- 16 -
HINWEIS: * Die Nadel muss in der höchsten Position stehen.
* Der Nadeleinfädler kann nicht mit der Zwillingsnadel
verwendet werden.
1. Stellen Sie die Nadel auf die höchste Position.
Senken Sie den Nadeleinfädler so weit wie möglich.
2. Haken A geht automatisch in das Nadelöhr. Ziehen Sie den Faden um
die Führung B herum und unter den Haken A.
3. Drücken Sie den Hebel nach hinten und führen Sie den Nadeleinfädler
in seine ursprüngliche Lage zurück. Ziehen Sie die Fadenschlinge
nach hinten, um das Einfädeln durch das Nadelöhr zu beenden.
Hinweis: * Drehen Sie nicht das Handrad, während Sie den
Nadeleinfädler verwenden.
* Berühren Sie beim Nähen nicht den Hebel für den
Nadeleinfädler, da dadurch der Nadeleinfädler beschädigt
wird. Wir empfehlen, den Strom auszuschalten, wenn Sie die
Einfädelvorrichtung verwenden.
NOTE: * Needle must be in its highest position.
* Needle threader cannot be used with a twin needle.
1. Raise the needle to its highest position.
Lower the needle threader lever as far as it will go.
2. Hook A will automatically insert itself into the needle eye. Bring the
thread around Guide B and under Hook A.
3. Push the lever back and lead the needle threader to its original
position. Pull the thread loop to the back to finish threading through
the needle eye.
Note: * Do not turn the hand wheel when using the needle threader.
* Do not touch threader lever while sewing as needle threader will
be damaged. We advise you to switch off power when using the
threader unit.
AUTOMATISCHES NADELEINFÄDELN / AUTOMATIC NEEDLE THREADER
A
B
(1)
(2)
(3)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG NM 680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG NM 680 in the language / languages: English, German as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info