463136
4
Zoom out
Zoom in
Previous page
1/57
Next page
3
ENGLISH
MDE 1200
Always disconnect the plug from the socket before carrying out any work on the
machine.
The carriage is adjusted by the factory
such that it will stop in any position and not
move down by the weight of the machine.
In case that the carriage play must be
adjusted, proceed as follows:
Loosen the locking nuts with fork wrench
SW8, adjust the carriage play with Allen
key size 2.5, and re–tighten the locking
nuts.
Secure the magnetic drill stand with the provided chain when working slanting or
vertical surfaces, or overhead such that it won’t fall down in case of power loss.
The safety chain must be applied such that the drill stand will move away from the
user in case of power loss.
For optimum operating safety the magnetic drill stand is equipped with a main switch.
MDE 1200 is also equipped with a temperature–controlled overload protection.
Depress the black push button. The red
control light will turn on.
It is possible to press the other buttons.
Depress the yellow push–button for
magnetic field to build up. The yellow
control light is on.
Depress the green push–button. The
green controlwill come and the drill will
start.
Depress the green push–button. The drill
will turn off..
Depress the yellow push–button. A long
signal tone is audible. The magnetic field
dies away after approx. 3 seconds.
Setting the free
motion of the
slide
Safety chain
Starting to work
Switching on the
stand
Switching on the
magnet
Switching on the
machine
Switching off
Switching off the
machine
Switching off the
magnet
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MDE 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MDE 1200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info