463136

AEG MDE 1200 Manual

6
Zoom out
Zoom in
Previous page
1/57
Next page
5
ENGLISH
MDE 1200
Unlike solid drill bits, core hole drill bits
only cut a ring into the material. Since with
this procedure less material is removed,
less power is needed and the drilling
progress is clearly faster than that when
using solid drill bits.
The brad point of the drill is pressed
against the material by resilience, but does
not penetrate the material when drilling. At
the end of the drilling process the brad
point pushes the cut material from the drill
bit and the drill hole.
The maximum retaining power is reached when using steel with a low carbon
content and a material thickness of at least 12 mm.
When drilling in steel with a thickness of less than 6 mm or in non–ferrous metals a
steel plate of at least 250 x 250 x 12 mm has to be fixed on the workpiece. The drill
stand can then be put onto this plate.
Apply the drill stand with the longer side of the magnetic foot parallel to the axis of
the workpiece.
Fill the free space underneath the magnetic foot with steel wedges or steel bars such
that as many lines of magnetic force as possible will run from the magnetic cores via
the workpiece to the magnetic foot.
In doing so the axis of the drill must be pointed exactly to the centre of the workpiece
or the drill might move slightly laterally.
From time to time, apply a few drops of oil to the rack toothing. The bearings of the
feed shaft are self–cutting and must not be greased.
Grease the sliding surface of the carriage with Molykote grease.
Use only AEG accessories and spare parts. Should components need to be
exchanged which have not been described, please contact one of our AEG service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the ten–digit
No. as well as the machine type printed on the label and order the drawing at your
local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320,
D–71361 Winnenden.
The range of accessories with part numbers is shown in our catalogue.
Drilling with core
hole drill bits
Drilling in thin
steel and
non–ferrous
metals
Drilling in
rounded and
heavily dented
materials
Maintenance
Accessories
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MDE 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MDE 1200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info