Manual AEG MD 5613 (page 24 of 42) (English, German, Dutch, French, Italian, Polish, Spanish)

552352

Zoom out

Zoom in

1/42

English

Usage

Before using the water jet you should clean your teeth with a

toothbrush.

1. Insert the nozzle onto the handle as far as possible. Turn

the nozzle so that its opening points to the water stop

switch. Ensure that the nozzle is ﬁxed ﬁrmly in position.

2. Fill the water container with water which is hand warm.

Donotllitwithhotwater!

3. In order to clean the nozzles, allow water to ﬂow through

the nozzle head (at maximum water pressure) into the

wash basin before and after each time the device is used.

4. Then use the water pressure regulator to select the

desired water pressure. Begin on the smallest setting, es-

pecially if you have problems with bleeding of the gums

or when the water jet is used by children.

5. Unlock the water stop switch on the handle.

6. Lean over the wash basin. Guide the water jet along the

gums, around the teeth.

7. Lock the water stop switch after the application. Set the

water pressure regulator to level I.

8. Turn off the device.

9. Please clean the device as described under “Cleaning

andCare”.

Cleaning and Care

WARNING:

• Pullthemainsplugfromthesocketbeforeeachclean-

ing.

• Donotimmersetheunitbaseandthemainsplugin

water.

CAUTION:

• Donotuseanywirebrushorotherabrasiveobjects.

• Donotuseanysharporabrasivecleaners.

1. Pour out the remaining water from the water container.

2. Pull the nozzle off the handle. Clean the nozzles under

warm running water. Dry the nozzles and place them onto

the unit base.

3. If you have used water additives, rinse the water con-

tainer with clear water. Then let ca. 300 ml clear water run

through the device as described under “Initial opera-

tion”.

4. Dry the handle before you place it back onto the unit

base.

5. Dry off the water container.

6. Clean the unit base with a moist towel. Then wipe it dry.

Noise development

The emisssion value referred to the place of work is below

70 dB (A).

Technical Data

Model: ................................................................................. MD 5613

Power supply: ............................................................230 V~ ; 50 Hz

Power consumption:.......................................................max. 46 W

Protection class: .................................................................... II (IPX 7)

Net weight: ...............................................................................1.3 kg

The right to make technical and design modiﬁcations in

the course of continuous product development remains

reserved.

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance

with the latest safety regulations.

Disposal

Meaning of the “Dustbin” Symbol

Protect our environment: do not dispose of electrical equip-

ment in the domestic waste.

Please return any electrical equipment that you will no longer

use to the collection points provided for their disposal.

This helps avoid the potential eff ects of incorrect dispsal on

the environment and human health.

This will contribute to the recycling and other forms of reutili-

sation of electrical and electronic equipment.

Information concerning where the equipment can be dis-

posed of can be obtained from your local authority.

The noise that you perceive during use occur by the water flow.

Operating noises

These noises are unavoidable due to the high performance,

but make no shortage represents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG MD 5613 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG MD 5613 Manual

Product: