Manual AEG MD 5613 (page 23 of 42) (English, German, Dutch, French, Italian, Polish, Spanish)

552352

Zoom out

Zoom in

1/42

English

Overview of the control elements

1 Single jet nozzle

2 Water stop switch

3 Handle

4 Water hose

5 Water pressure regulator

6 On/Off switch

7 Unit base

8 Water container

9 Handle for opening the lid / Handle for water container

Unpacking the Device

1. Take the device out of its packaging.

2. Remove all packaging materials, such as foils, ﬁller mate-

rial, cable brackets and cardboard packaging.

3. Check the scope of delivery.

NOTE:

There may still be some dust or production residues on

the device. We recommend that you clean the device as

describedunder“Cleaning”.

Application instructions

Electrical connection

1. Check whether the mains voltage that you want to use

matches the one of the device. You will ﬁnd the informa-

tion about it on the type plate.

2. Connect the mains cable to a properly installed ground-

ed socket.

On / Off switch (6)

Switch setting 0: The device is turned off

Switch setting I: The device is turned on

Water pressure regulator (5)

With the water pressure regulator, you can set three different

power levels.

Level I: low water pressure

Level II: medium water pressure

Level III: high water pressure

Water stop switch (2)

You can use this switch to momentarily interrupt the applica-

tion. The shut-off is done mechanically. The pump of the

device will continue to be in operation.

Position I of the switch: Water is ﬂowing

Position 0 of the switch: Water is stopping

Nozzles (1)

4 nozzles with different color markings are contained in the

scope of delivery. These can be assigned to different users.

When the gums are bleeding . . .

It is normal for a normal bleeding to occur when using the

oral irrigator the ﬁrst few times. Should your gums bleed

continually, please consult your dentist.

Initial operation

1. Remove the water container (8) from the unit base by the

handle. Open it with the lever (9).

2. Fill the water container with water. Observe the marking

MAX. Close the water container. Set it back onto the unit

base.

3. Turn on the device with the On / Off switch (6).

4. Remove the handle (3) of the unit base. Hold the opening

above a wash basin.

5. Switch the regulator (5) to level III.

6. Unlock the water stop switch (2) by sliding it to position I.

7. Let the water run directly into the wash basin to remove

possible residues. Then lock the water stop switch by slid-

ing it to the position 0.

8. Turn off the device.

9. Brieﬂy rinse off the nozzles under running water.

Your oralirrigator is now ready for use.

• Whenusingbraces,ndoutwhethertheusageofanoralirriga-

tor is possible. We do not assume any liability for possible dam-

ages.

• Incaseofdiseasesinthemouthandthroatarea,youshouldask

your doctor whether the use of an oral irrigator is advisable.

• Ensurethatthewatertube(connectionofdeviceandoralirriga-

tor) is not stuck or kinked.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG MD 5613 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG MD 5613 Manual

Product: