English
41
Defect
Unpacking
Setting up
Wall mounting
Playback of les via USB.
Reception of radio programmes.
Any other use is considered non-intended use and is prohibited.
If the machine should become defective at some point:
If the power supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer services, in order to
avoid hazards.
Should uid have seeped into the player or if the player has been
dropped down or damaged in any other way, the player must be
examined by an authorized dealer. Disconnect the player from the
power supply and consult an authorized dealer.
Setting up and connecting
Unpack the appliance and all accessories and check that the contents
are complete.
CAUTION:
Always transport/send the player in its original packaging to prevent
it from being damaged. Keep the packaging for this purpose. Dispose
of unnecessary packaging material in accordance with the regulations
applicable in your country.
NOTE:
Get in touch with your dealer immediately if you notice damage
caused by transport.
1. Put the stand on the base plate. Ensure that the guiding rail has
been aligned with the notch.
2. Mount the stand as shown.
3. Put the device on a stable, horizontal and at surface. Keep a dis-
tance of at least 10 cm from walls and other objects.
4. Connect the mains cable to the mains connection socket (Fig. 1/23).
5. Connect the device to a properly installed power socket.
You can also mount the device to a wall (mounting accessories not
included).
CAUTION:
Make sure that there are no hidden cables in the wall that could be
damaged!
