463137
22
Zoom out
Zoom in
Previous page
1/130
Next page
19
MBS 30 Turbo
Rated Input ...........................................
No-load speed ............................................
Saw blade dia. x hole dia ...............................
Diamond wheel dia. x hole dia ......................
Cutting depth at 90° ......................................
Cutting depth at 45° ......................................
Weight without cable ....................................
GB
English
SAFETY INSTRUCTIONS
WHEN WORKING WITH SAW BLADES
Cutting procedures
DANGER: Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary handle, or motor
housing.
If both hands are holding the saw, they cannot be cut by
the blade.
Do not reach underneath the workpiece.
The guard cannot
protect you from the blade below the workpiece
.
Adjust the cutting depth to the thickness of the workpiece.
Less than a full tooth of the blade teeth should be visible below the
workpiece.
Never hold piece being cut in your hands or across your leg.
Secure the workpiece to a stable platform.
It is important to
support the work properly to minimize body exposure, blade binding,
or loss of control.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a „live“ wire
may make exposed metal parts of the power tool „live“ and shock
the operator.
When ripping always use a rip fence or straight edge guide.
This improves the accuracy of cut and reduces the chance of blade
binding.
WARNING! Read all safety warnings and all
instructions, including those given in the accompanying
brochure. Failure to follow the warnings and instructions may result
in electric shock,  re and/or serious injury. Save all warnings and
instructions for future reference.
Wear ear protectors. Exposure to noise can cause hearing loss.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Appliances used at many di erent locations including open air should
be connected via a residual current device (FI, RCD, PRCD) of 30mA
or less .
Always disconnect the plug from the socket before carrying out any
work on the machine.
Only plug-in when machine is switched o .
Do not use inserted tools not corresponding to the key data given in
these instructions for use.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
Do not  x the on/o switch in the on” position when using the saw
hand-held.
SAFETY INSTRUCTIONS
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications, with
di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running
but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
TECHNICAL DATA Fiber Cement Saw
Noise/vibration information
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) ................................
Sound power level (K = 3 dB(A))....................................
Wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
h
sawing into wood ..........................................................
Uncertainty K= ..............................................................
cutting into stone ...........................................................
Uncertainty K= ..............................................................
................1010 W
................9250 min
-1
...........127 x 20 mm
........125 x 22,2 mm
....................32 mm
....................28 mm
...................3,3 kg
..........94 dB(A)
........105 dB(A)
........ 3,7 m/s
2
........ 1,5 m/s
2
........ 4,5 m/s
2
........ 1,5 m/s
2
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MBS 30 Turbo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MBS 30 Turbo in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info