Manual AEG KRC 4361 BT (page 36 of 62) (English, German, Dutch, French, Italian, Polish, Spanish)

546483

Zoom out

Zoom in

1/62

English

5. Press the TIME SET/COOK TIMER button for conﬁrma-

tion. The minute indicator will ﬂash on the display.

6. Adjust the setting with the SKIP+/SKIP- buttons (7/8).

7. Save the time setting by pressing the TIME SET/COOK

TIMER button again.

Adjusting the volume

Use the VOL+/VOL- buttons (9) to adjust the volume.

Display brightness

YoucanusetheSNOOZE/DIMMERbutton(15)toadjustthe

brightness of the display and of the light strip beneath the

operating keys.

Listening to the radio

Scanning stations

1. Use the

/FUNC. button (10) to select the radio mode.

2. Tune the desired stations with the SKIP+ (7) and SKIP- (8)

buttons. When holding down either of the buttons, the

devicewillstartscanninguntilthenextradiostationis

found. The display will show the respective frequency.

3. If there is interference on the received station, try to

improve the reception by rotating, winding or unwinding

the wire antenna.

Presetting radio stations

The device can preset up to 30 radio stations. To preset a

station, follow the steps below:

1. Search for a station as described in “Scanning stations”.

2. Press the ANSWER/PROG/AMS button (6). The display

will show PROGRAM and the respective preset location

will begin to ﬂash.

3. Use the PRE.+/ALARM 2 (12) and PRE.-/ALARM 1 (13)

buttons to choose the preset location for the correspond-

ing station.

4. Press the ANSWER/PROG/AMS button again. The

station will be preset. The PROGRAM indicator and the

preset location will disappear.

Recalling preset radio stations

Use the PRE+/ALARM 2 (12) and PRE-/ALARM 1 (13) buttons

to select the memory locations.

Automatic station scan

Important! Any previously stored radio stations will be over-

written.

When holding down the ANSWER/PROG/AMS button (6) for

approx.3seconds,thedevicewillstarttheautomaticstation

scan searching the entire frequency range automatically for

stations. The stations found will be stored on the preset loca-

tions 1-30 in ascending order.

NOTE:

The order cannot be changed once set.

Bluetooth Function

Bluetooth involves a technology for wireless radio connec-

tion of devices over a short distance. Devices with Bluetooth

standard are transmitting between 2.402 and 2.480 GHz in

the ISM band (Industrial, Scientiﬁc and Medical). Interference

canbecausedforexamplebyWLAN-networks,DABradios,

cordless phones, or microwave ovens which work on the

same frequency band.

This device offers you the possibility to use a Bluetooth-

enableddevice.Thefunctionalradiusislimitedtoapprox.

15 metres depending on the surroundings and the unit used.

If your playing device supports the A2DP proﬁle (Advanced

Audio Distribution Proﬁle) and has a music-player function,

then you can also wirelessly transfer music to the device. The

A2DP proﬁle involves a multi-vendor Bluetooth proﬁle. By

streaming, stereo-audio signals are wirelessly transferred be-

tween the playing device (source) and the receiving device.

To be able to remotely control the source, the playback de-

vice must support the AVRCP proﬁle (Audio Video Remote

Control Proﬁle).

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

Logging on devices (Pairing)

Before you listen to music via the unit, you must pair the

devices.

1. Ensure, that the Bluetooth function is activated in your

player (e.g. mobile phone). For this, refer to the operation

manual of your player.

2. Press the

/FUNC button (10) repeatedly, until “bt” is

shown on the display. The BT indicator light (5) blinks.

This signalizes that the device is in pairing mode.

3. Choose the Bluetooth menu in your player and register

the device in your player. For this, refer to the operation

manual of your player. The device “KRC 4361 BT” will

show in your player as a selection.

NOTE:

Only one playback device may be connected to the

device at one time. If the device is already connected

to another playback device, then the device will not

appear in the BT selection menu.

4. Now enter the password “0000” in your player, depend-

ing on the device manufacturers, model, and software

version.

If the pairing was done successfully, a beeping sound can

be heard and the BT indicator light will be lit. For the further

procedure, please refer to the user manual of the playback

unit.Ifpossible,adjustthevolumeoftheexternalunittoa

comfortable level.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG KRC 4361 BT in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG KRC 4361 BT Manual

Product: