Start-up of the device / Introduction
• Read the operating instructions thoroughly before
the start-up!
• Makesurethatthedeviceisadequatelyventi-
lated!
Power supply
• Inserttheplugintoaproperlyinstalled230V,
50Hzpowersocket.Thedisplaylightsupinblue
and the time appears.
• Pleaseensurethatthemainsvoltagecorresponds
to the information on the type plate.
Inserting the batteries (not supplied)
If there is a power cut or the mains plug has been
removed from the power socket, the settings will be
retained if the power reserve batteries are inserted.
1. Open the battery compartment (30) on the bottom
of the device.
2. Insert 2 batteries of type R03 "AAA" 1.5 V. Ensure
that the polarity is correct (see the floor of the
battery compartment)!
3. Close the battery compartment again.
4. If the device is not used for a prolonged period
of time, please take the batteries out in order to
prevent leakage of battery acid.
Remote Control Batteries
• Openthelidofthebatterycompartmentonthe
back of the remote control.
• Insert2batteriesoftypeR03"AAA"1,5V.Ensure
that the polarity is correct (see the floor of the
battery compartment)!
• Close the battery compartment again.
• If the remote control is not used for a prolonged
period, remove the batteries in order to prevent
battery acid leaking.
Switching the device on/off (19)
Switch the device to the standby mode with the
STANDBY button (the time is displayed). If this
button is pressed once more, the device switches
on again.
Infrared remote control
For operating the music centre from a distance of
up to 5 metres without a lead. If the range of the
remote control is reduced, the batteries have to be
replaced. During operation ensure that there is
nothing blocking the direct line between the remote
control and the sensor (18) on the machine.
EQ (7/23)
(Preset equalizer function). Various sound modes
are available (ROCK, JAZZ, POP, CLASSIC).
VIDEO / AUDIO R/L Input Sockets (26/27)
For connecting analogue replay devices. This port
also allows you to play back pictures and sound
from other media devices, such as an MP3 player,
a CD player, etc.
1. Connect the external device with an appropriate
cinch cable (3x RCA) to the VIDEO / AUDIO R/L
sockets.
2. Repeatedly press the TV/AUX button (2/18) until
the display (1) shows AUX.
3. For the remaining procedure please see the
operating instructions of the external sound
source.
4. You can change the volume with the VOL+/-
button (12/14/33).
English
24
NOTE:
You can optionally operate the device with a 12V
power adaptor also. (Power adaptor not included.)
CAUTION:
•
Different battery types or new and used batteries
must not be used together.
• Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries
at the relevant collection bin or at your dealer’s.
WARNING:
Do not expose the batteries to high temperatures
or direct sunlight. Never throw batteries into the
fire. There is a danger of explosion!
CAUTION:
•
Different battery types or new and used batteries
must not be used together.
• Batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries
at the relevant collection bin or at your dealer’s.
WARNING:
Do not expose the batteries to high temperatures
or direct sunlight. Never throw batteries into the
fire. There is a danger of explosion!
NOTE:
Adjust the volume of the external device to a
comfortable level.
