546464
23
Zoom out
Zoom in
Previous page
1/38
Next page
Installation Instructions
for Bottom-Mounted Devices
• Removeallobjectsfromthecupboardand
anything which is fragile in the adjacent cup-
boards.
• Fortheinstallationthecupboardmustfulfilthe
following conditions:
Thickness of the cupboard floor between
16 mm and 20 mm.
• Thewallmountingofthecupboardmustbestable
and anchored firmly in the wall with at least 2
screws.
• Important! Do not install the device above a
cooker!
• Wheninstallingthedeviceitmustbeensuredthat
there is a power socket within reach.
• Themainssocketmustbewithineasyreach,
so that the plug can be quickly removed in an
emergency.
• Important! Do not connect the device to the
mains power supply until after installation!
• Thedevicecannotbeinstalledundercupboards
under which there is a lighting strip.
• Forinstallationyoumayrequirethefollowing
items: a drill with 6 mm drill bit, gimlet or nail,
screwdriver, measuring tape, adhesive tape,
scissors, safety goggles.
Installation Accessories
4 screws
4 spacers
1 drilling template
Installation
Illustration A (see Page 4)
• Usetheadhesivetapetoadherethetemplateinto
the cabinet with the word FRONT facing forward.
• Adherethetemplatefirmlyunderthecupboard
with adhesive tape. With the help of a gimlet or
nail pierce the crosses at the attachment points
and use it to mark the holes.
• Removethetemplateanddrilltheholesintothe
wall cupboard.
Illustration B (see Page 4)
Lightly turning the spacer gives you a choice of
three different heights.
• Choose the spacer position that best matches
the moulding. Insert the spacer into the holes
provided on the device.
Illustration C (see Page 4)
• Countersinkthescrewsintotheholesinthe
cupboard.
• Usingthe4screwsandthespacers,attachthe
kitchen radio to the bottom of the cupboard.
• Tightenthescrewswithascrewdriveruntilthey
are hand tight.
English
23
CAUTION:
Make sure that the plug is not inserted when
assemb ling the device.
CAUTION:
You should use only the installation accessories
supplied.
WARNING:
If screws are inserted too deeply (screws too
long) this may damage the device or represent a
hazard to the user or others.
NOTE:
For cabinets with overhangs, first insert the
crosses into the attachment points. Then stick the
drilling template, with the printed side up, under
the cabinet.
CAUTION:
The thickness of the cupboard floor must be
between 16 mm and 20 mm.
NOTE:
Sufficient ventilation is only guaranteed with a
spacer.
CAUTION:
You should use a hand screwdriver and not a
battery-driven one.
AEG_KRC_4330.indd 23 10.09.2009 13:24:56 Uhr
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KRC 4330 DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KRC 4330 DVB-T in the language / languages: English, German as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info