698131
20
Zoom out
Zoom in
Previous page
1/28
Next page
20 21www.aeg.com
PLEASE DESCALE YOUR MACHINE
message is displayed after a period
of time established according to water
hardness.
The machine is set by default for a hard-
ness level of 4. The machine can also
be programmed according to the hard-
ness of the mains water in the various
regions so that the machine needs to be
descaled less often.
12.1 Measuring water hard-
ness
1. Remove the “Total hardness test”
indicator paper (B1) from its packag-
ing.
2. Immerse the paper completely in a
glass of water for one second.
3. Remove the paper from the water
and shake lightly. After about a min-
ute, 1, 2, 3, or 4 red squares form,
depending on the hardness of the
water. Each square corresponds to
one level.
12.2 Setting water hardness
1. Turn the rotary (C2) to select “Menu”,
then press the dial to confirm.
2. Select “Basic Settings”, press to
confirm, select “Water” and confirm.
3. Select “Hardness” and set the
required level from 1 to 4 (Level 1
= soft water; Level 4 = very hard
water);
The machine is now reprogrammed with
the new water hardness setting.
12. SETTING WATER HARDNESS
RINSING:
Place the container used to collect
the descaler solution empty under the
hot water/steam spout and press OK;
18. Hot water is delivered from the hot
water/steam spout and RINSING
UNDERWAY is displayed.
19. EMPTY DRIP TRAY: At the end of
rinsing, remove, empty and replace
the drip tray (A8) and ground con-
tainer (A1). Press NEXT;
20. DESCALE COMPLETE: press OK;
21. FILL TANK WITH FRESH WATER:
empty the container used to collect
the rinse water, remove the water
tank and fill with fresh water up to
the MAX level, then put back in the
appliance.
Descaling is complete. Machine is turned
off.
If the descaling cycle is not com-
pleted correctly (e.g. no electric-
ity) we recommend repeating the
cycle;
After descaling, it is normal for the
ground container (A1) to contain
water.
If the water tank has not been
filled to the MAX level, at the
end of descaling, the appliance
requests a third rinse to guaran-
tee that the descaler solution has
been completely eliminated from
the machine’s internal circuits.
Before starting rinsing, remember
to empty the drip tray;
The appliance may request desca-
ling cycles at very short intervals.
This is normal and due to the
appliance’s advanced control
system.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KKE994500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KKE994500 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG KKE994500

AEG KKE994500 User Manual - German - 28 pages

AEG KKE994500 User Manual - Dutch - 28 pages

AEG KKE994500 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info