698131
18
Zoom out
Zoom in
Previous page
1/28
Next page
18 19www.aeg.com
automatically asks to clean the
circuit of the jug at the end of
the recipe. Turn the rotary to the
CLEAN position.
Clean the milk container each time you
prepare milk as described below:
1. Lift and remove the lid;
2. Extract the milk container (B8) from
the thermal casing, holding it by the
two side grips.
IMPORTANT!
The thermal casing must not be
filled with or immersed in water.
Clean with a damp cloth only.
3. Remove the milk spout and intake
tube (fig. 33 Quick Guide).
4. Turn the froth adjustment dial clock-
wise to the “INSERT” position and
pull off.
5. Wash all components of the frother
thoroughly with hot water and a mild
dish-washing detergent. All compo-
nents and the container are dish-
washer safe, placing them in the top
basket of the dishwasher.
Make sure there are no milk residues
on the hollow and groove under the
dial.
If necessary, scrape the groove with
a toothpick.
6. Rinse inside the froth adjustment dial
seat and the milk frother connector
hole.
7. Check that the intake tube and spout
are not clogged with milk residues.
8. Replace the dial (lining up the arrow
with the word INSERT), spout and
milk intake tube.
9. Place the milk container in the ther-
mal casing.
10. Place the lid back on the milk con-
tainer.
10.11 Cleaning the hot water/
steam connection nozzle
Each time you prepare milk, clean the
connection nozzle (A5) with a sponge to
remove milk residues from the gaskets.
10.12 Cleaning the hot water/
steam spout after use
Always clean the hot water/steam spout
(B6) after use to avoid the build-up of
milk residues and prevent it from clog-
ging.
1. Place a container under the hot
water/steam spout and deliver a little
water. Stop delivery of hot water by
pressing STOP.
2. Wait a few minutes for the hot water/
steam spout to cool down, then
extract. Hold the spout with one hand
and with the other, turn the cappuc-
cino maker and pull it downwards.
3. Also remove the steam connection
nozzle by pulling it downwards.
4. Check the hole in the connection
nozzle is not blocked. If necessary,
clean using a toothpick.
5. Wash all parts of the spout thorough-
ly with a sponge and warm water.
6. Insert the connection nozzle, then
the cappuccino maker on the spout
by pushing it upwards and turning it
clockwise until it is attached.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KKE994500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KKE994500 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG KKE994500

AEG KKE994500 User Manual - German - 28 pages

AEG KKE994500 User Manual - Dutch - 28 pages

AEG KKE994500 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info