Manual AEG IWQ 121 (page 12 of 40) (English, German, Dutch, French, Polish)

648414

Zoom out

Zoom in

1/40

● Remove the strain relief, as shown in #9 and feed the electric lead in from

behind through the round opening under the connection block and make con-

nections according to #9. Connect the 2 phases to the connection block. The

blue wire to the N pole, the brown wire to the L pole. L and N symbols are mar-

ked under the connection block.

● Secure the supply powercord xing the strain relief.

● Fix again in position the back plastic cover, as shown in #10.

● Hang the heater to the wall bracket and pull it down to securely x it to the

bracket in the direction shown by the arrow, as in #11.

● Check that the unit is correctly xed pulling it towards you; it shouldn’t move.

4) Connection to the mains electricity supply

● This product has a double electrical insulation protection (class II) and therefo-

re does not require an earth connection.

● The disconnection devices of the supply rating must enable the complete

disconnection in case of the category of overvoltage III

● The appliance may only be connected to a 1/N/PE 230V AC 50 Hz supply.

If the cordset is to be used we recommend to use a rubber coated one (type

H05RR-F) with at least a 2 x 1 mm2 section .

● The safety precautions usual in the country of use and the regulations of the

local electricity supply are to be observed. The appliance is tted in the factory

with an all – pole switch providing a contact break distance of ≥ 3 mm.

5) Operation

● Pulling the switch the product gets in function. You can see from the front

viewing window the following symbols:

Product rating 0 I II III

230V 1200W OFF 600W 1200W X

230V 1800W OFF 600W 1200W 1800W

6) Maintenance

● This product does not require any special maintenance.

● Clean the product with a dry cloth once every 6 months.

● If the product requires repairing, contact an authorised technical service cen-

tre.

● When replacing the power cable, use a 2x1,00mm2 H05RR-F HAR type. This

operation must be performed by qualied personnel and never by the end user

in order to avoid damaging the appliance and jeopardising personal safety.

7) Legal notice

Environment and recycling

Please help us to protect the environment by disposing of the

packaging in accordance with the national regulations for waste

processing.

Recycling of obsolete appliances

Appliances with this label must not be disposed off with the general

waste. They must be collected separately and disposed off accor-

ding to local regulations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG IWQ 121 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG IWQ 121 Manual

Product: