648414

AEG IWQ 121 Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
● If the cordset is damaged and you have to change it,
do not do the job yourselves! Take the product to an after
sales authorised repair centre or to a person with similar
skill and knowledge, in order to avoid any risk of danger.
● The appliance must be positioned so that the plug is
always accessible.
● During commissioning of the appliance, the heating ele-
ments may briey emit low levels of smoke and odour.
This is non-hazardous. The smoke and odour will disperse
within a few seconds.
Make sure that the room is adequately ventilated (with a
partially open window, for example).
● The appliance is unsuitable for continuous operation.
Temporarily switch off the appliance after max. 10 hours of
runtime and allow it to cool down.
2) Positioning
● The product must be installed respecting the minimum distances from ceiling,
oor and objects at the sides indicated in picture #1.
● This infrared wall mounted heater is only suitable for mounting horizontally on
a solid vertical wall. Never install it vertically or on the ceiling as indicated in
picture #2.
● The product must not be mounted on any inammable surface such as wood
or plastic. Any inammable materials must be at least 100 cm. away from the
front face. This is also the minimum distance the user has to keep from the pro-
duct because during use the front grille gets hot.
● Care should be taken to mount the appliance so that the product and the
pull cord switch are out of the reach of children. If it is installed in a bathroom, it
should be positioned so that it cannot be touched by anyone who is in the bath
or in the shower.
● After use we recommend to leave the product cool down for at least 10 – 15
minutes before touching it.
3) Installation
We recommend to switch off the mains electricity supply before proceeding
with the following steps.
● Fix the wall bracket using it as a template to drill holes for the rawplugs. Mind
that the 3 holes which hang the unit should be in the position shown in #4, NOT
upside down.
● The unit can be oriented in 2 positions.
- Horizontally
- Downwards
According to the orientation you prefer you have to x the screws in position 1 if
you want the unit to be horizontal, position 2 if you want the unit to be inclined
downwards, as shown in #7.
● Remove the back plastic cover from the unit, as shown in #8.
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG IWQ 121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG IWQ 121 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info