648404
13
Zoom out
Zoom in
Previous page
1/36
Next page
13
Installation – for qualied contractors
8. Appliance description
8.1 Standard delivery
The following are delivered with the appliance:
Wall mounting bracket (incl. xing screw and nut)
8.2 Special accessories
IR Dimmer 3600 S Schuko
IR Dimmer 3601
IR Funk Dimmer 2000
IR Funk W
IR Funk S
IR Funk Multi BiDi
IR Strebenklemme (brace clamping bracket)
9. Installation
9.1 Installation conditions and
preparations
!
CAUTION Injury
Install the appliance out of the reach of children.
Never install this appliance on or below combustible
materials.
Never install the appliance directly below a socket.
Install the appliance on the wall or ceiling.
Observe the specied minimum clearances (see
chapter "Specication / Dimensions"). This appli-
ance gives off radiated heat. Therefore ensure that
there are no objects between the appliance and the
person or objects to be heated, such as furniture, for
example.
Wood ceilings may become hot even if the minimum
clearances are observed. Dark spots or ne shrink-
age cracks on wooden ceilings may therefore occur.
9.2 Power supply
WARNING Electrocution
Carry out all electrical connection and installation
work in accordance with relevant regulations.
» Only connect the appliance to a correctly installed
mains socket.
We recommend a dedicated fuse for this appliance (see
chapter "Specication / Data table"). From 3600 W up-
wards, only ever connect one appliance per fuse.
Note
Observe the type plate. The specied voltage must
match the mains voltage.
WARNING Electrocution
The appliance must be able to be separated from
the power supply by an isolator that disconnects all
poles with at least 3 mm contact separation.
An external socket must be able to be isolated from
the power supply across all poles.
Equip the supplying power circuit of the appliance
with an RCD (nominal earth leakage current 30 mA).
10. Installation
10.1 Appliance installation
Note
Check in chapter "Specication / Data table" wheth-
er you are able to install the appliance vertically or
horizontally.
» Secure the mounting bracket on the wall or ceiling
using suitable xing materials.
» Secure the appliance to the mounting bracket using
the screw and nut provided.
» Route the power cable from the appliance either to-
wards the back, top or bottom.
10.2 Adjusting the tilting angle
The tilting angle can be adjusted over a range of 100°.
We recommend a setting of 4.
CAUTION Burns
If the appliance is already in use, let it cool down
before adjusting the tilting angle.
» Undo both screws on the pivot hinge.
» Set an appropriate tilting angle.
» Retighten the two screws again.
!
Material losses
Ensure that the appliance does not come into con-
tact with the power cable.
10.3 Dismantling
Pull the mains plug out of the socket.
CAUTION Burns
First allow the appliance to cool down before trans-
porting or storing it.
Remove the appliance from the wall mounting bracket.
11. Handover
Explain the functions of the appliance to the user. Draw
special attention to the safety instructions. Hand over the
operating and installation instructions to the user.
12. Troubleshooting
Only use an original spare part from us if you are replacing
the power cable.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG IR Comfort 1524 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG IR Comfort 1524 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info