Manual AEG IDE74243IB (page 80 of 168) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

780558

Zoom out

Zoom in

1/168

If no cooking zone is selected and the STAND-ALONE timer is not

active, the timer closest to the end of the countdown is displayed.

If no cooking zone is selected and the STAND-ALONE timer is

active, it is displayed with priority, with respect to the timer closest to

the end of the countdown.

The display mode of the countdown is the same for the

“STAND-ALONE” Timer (see previous paragraph “STAND-

ALONE” Timer)

When the timer has finished the countdown, an acoustic signal

sounds and the cooking zone switches off.

To switch off the Timer:

• select the cooking zone (2)

• set the duration of the Timer to , using (5)

Note: If the induction hob turns off with the timer active, the timer will

continue to count down until the set time expires; if you wish to

manually stop the timer, it is necessary to turn the hob on again and

follow the timer switch-off instructions provided above.

Power Limitation

The Power Limitation function allows setting of the operation of the

product, limiting its maximum absorption.

Note: the setting must take place with the hob off, without pressing

the (1) key, when the hob is connected to the mains, or

when the electric mains are reconnected within the following 2

minutes.

To set the Power Limitation:

- press

(which will be flashing, only for the first 2 minutes after powering of the

product)

- continuing to hold down press, one at a time, all the areas of

Selection/Display (2) of the cooking zones, anti-clockwise starting

from the front right zone (FR)

- each press will be accompanied by a short audible signal

- once all the Displays (2) have been pressed, it will be possible to

release the key

at this point:

- the Display (2) of the left rear zone (RL) will show in alternate

sequence the symbols “C” and “0”, indicating that it is possible to

perform the setting:

select the Display (2-RL)

then scroll on the Selection bar (3), until the symbols “C” and

“8”,appear

the Display (2-FL) will show the current setting**

0 = 7.4 KW

1 = 4.5 KW

2 = 3.1 KW

** by default the setting is 7.4 KW

To change the Power Limitation setting

- press the Display (2) of the left front area (FL)

- then scroll on the Selection bar (3), to select the new setting

- to save the choice made, press the (1), for 2 seconds; a

prolonged audible signal will be emitted to confirm the successful

setting

Bridge Zones

Thanks to the Bridge function, the cooking zones are able to work in

a combined manner, creating a single zone with the same power

level. This function allows evenly distributed cooking with large-sized

pots and pans.

The front “Master” cooking zone can be used in combination with the

corresponding “Secondary” cooking zone at the back

(to check which zones are equipped with this function, see the

illustrated part of this manual).

To activate the Bridge Function:

- simultaneously select the two cooking zones you want to use

- the Display (2) of the "Secondary” cooking zone shows the

symbol " "

- using the Selection bar (3), it will be possible to set the Level

(Power) of exercise, which will be shown in the Display (2) of the

"Master” cooking zone

- to deactivate the Bridge Function simply repeat the same

activation procedure

Note: the Cooking Timer Zone, activated during the Bridge

Function, causes the automatic shut-down of both cooking zones, as

in this case they are considered a single combined area.

USING THE EXTRACTOR FAN

Switch-on

Press (touch) briefly (1) hob/extractor;

continuing to press, all the available functions will become visible

for a few moments, e, after which only the main ones will remain

active; the others can be used, and will be activated,

subsequently, during use of the device.

IMPORTANT:

all the available functions will be illuminated with light intensity,

which will become more intense only when they are activated.

Press again to turn off

Note: This function has priority over the others.

• Starting the extractor:

Touch (press) the Selection zone (12) to activate the extractor

• Extraction speed (power):

The extractor is equipped with 3 levels of extraction speed (power)

Touch and slide your fingers along the Selection bar (3):

to the right to increase the level of power;

to the left to decrease the level of power.

The power level set will be displayed in the Selection/Display

area (12)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG IDE74243IB in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 11.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG IDE74243IB Manual

Product: