Manual AEG IDE74243IB (page 79 of 168) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

780558

Zoom out

Zoom in

1/168

The Automatic Heat UP function allows the set power to be reached

more quickly; with this function it is possible to cook food faster

without the risk of burning it, insofar as the temperature does not

exceed the set level.

This function is available for power levels 1-8 .

Activation:

• from the cooking zone on press (7)

• a flashing " " is shown in the Display (2) which alternates with the

power set in the cooking zone

Increasing the power level of the cooking zone: the Automatic Heat

Up function remains active, with the new temperature setting;

Decreasing the power level of the cooking zone: the Automatic Heat

function is deactivated.

Note: by selecting another cooking zone at the same time, the

symbol (7) will return to being illuminated with a slight intensity

light, and it will be possible to proceed, also for this area, to activation

of the function; the function remains active in the area where it has

already been set, as indicated in the Display (2)

Warming Function

Warming Function is a control function that allows the maintaining of

heat at a constant temperature, at an optimised power level; ideal to

keep ready-cooked foods warm. The Warming Function is activated

the first time the key is pressed

The symbol appears in the display (2) of the zone that is

working in the Warming Function

Note: by selecting another cooking zone at the same time, the

symbol (8) will return to being illuminated with a slight intensity

light, and it will be possible to proceed, also for this area, to activation

of the function; the function remains active in the area where it has

already been set, as indicated in the Display (2)

• Press (8) again to deactivate and switch off , until

bringing of the level shown in the Display (2) to “ ”.

Note: if there are several zones working in the Warming Function,

first select the desired zone using the Selection zone (2) ;

the function can also be deactivated via the Selection Bar (3),

bringing the Power Level to “ ”.

Pause

The Pause function allows active functions on the cooktop to be

suspended, bringing the cooking power to zero.

Activation:

• press “ ” (9)

• a flashing “ ” is shown in the displays (2)

To deactivate the function:

• press (9) the Selection Bar (3) lights up

• press/slide on the Selection Bar (3) to deactivate the function

Note: deactivation restores the conditions of the hob before the

pause; the hob continues to work with the same settings previously

set.

Note: if after 10 minutes thePause Function is not deactivated, the

hob switches off automatically.

Note: the Pause Function does not affect the extraction.

“STAND ALONE” Timer

The Timer function is a countdown independent of the cooking zones

(and the extraction zone).

The timer is activated by pressing the Zone/Display (4)

Use the symbols (5) to set the duration of the

Timer,which is displayed in the Zone/Display (4)

Note: wait 10 seconds without pressing any other command,

so that the countdown starts.

The format of the Timer is .

- . for the times

- for the minutes

Note: the timer can be set up to a maximum of 1h and 59min.

In the Zone/Display (4) the remaining time will be displayed;

at the end of the countdown, an acoustic signal will sound

Note: in the display of the countdown, for a time less than 10

minutes, the following format is evident

- . minutes

- seconds

with fixed light point

To switch off the Timer:

• select Zone/Display (4)

• set the duration of the Timer to , via (5)

Note: If timer is ON and the appliance is switched OFF, the timer

remain ON until it expires.

To reset the timer before, switch ON the appliance again, the timer

will switch OFF.

Cooking Zones Timer

The Cooking Timer Zone function is a countdown that can be set,

also at the same time, on each cooking zone

At the end of the period set, the cooking zones switch off

automatically and the user is notified with a dedicated acoustic signal.

Activation of the cooking zone timer function

• Touch (press) the Selection/Display area (2) (power level ≠0)

• Press (6) relating to the cooking zone

Use the symbols (5) to set the duration of the Timer,

which is displayed in the Zone/Display (4)

during setting the symbol (6) is flashing

Note: wait 10 seconds without pressing any other command, so that

the Cooking Zone Timer will start.

Note: by pressing and holding (6) , the cooking zone timer is

reset

If desired, repeat the operation for several cooking zones.

Note : each cooking zone can have a separate Timer set; the

countdown for the selected cooking zone will be appear on the

display (4);

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG IDE74243IB in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 11.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG IDE74243IB Manual

Product: