603890
39
Zoom out
Zoom in
Previous page
1/120
Next page
37 ENGLISH
Step Action
11 Connect the cold water.
Connect the cold water inlet of the tap (8) to the t-piece (14) (see
image 22). NOTICE! The cold water inlet of the tap (8) is the blue
woven hose.
12 Connect the warm water.
If you install the solo configuration:
Connect the warm water inlet of the tap (9) to the warm water
supply (see image 23). NOTICE! The warm water inlet of the tap
(9) is the red woven hose.
If you install the combi configuration:
Connect the warm water inlet of the tap (9) to the warm water
outlet of the mixing valve (29) (see image 24). NOTICE! The warm
water inlet of the tap (9) is the red woven hose. The warm water
outlet of the mixing valve (29) is indicated with “MIX”.
4.4 Filling the appliance with water
CAUTION! Do not insert the plug of the boiler into the earthed AC wall
socket! First fill the system with cold water according to the instructions in
this section.
To fill the appliance with cold water:
Step Action
1
Make sure all connections are tightened properly to prevent leakages.
2 Make sure water can drip freely from the pressure-relief device (22).
3
If the mixing valve is (D) installed, set the temperature with the
temperature regulator (34).
4
Make sure the valve (16) on the pressure safety valve is in the OPEN
position.
5 Open the cold water supply valve.
6 If present, open the warm water supply valve.
7 Check all connections for water tightness.
8
Push and hold the button on the boiling water handle (11). Turn the
handle counterclockwise to open the valve. Keep the valve open until a
constant flow of water flows out the spout.
9
Move the mixer handle (12) to the right to open the valve. Keep the
valve open until a constant flow of water flows out the spout. The
system is now fully filled with water.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG GYB00816ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG GYB00816ST in the language / languages: English, German, Dutch, French, Norwegian as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info