603890

AEG GYB00816ST Manual

38
Zoom out
Zoom in
Previous page
1/120
Next page
36 www.aeg.com
Step Action
8 Connect the pressure safety valve.
If you are using a filter:
– Connect one end of the filter hose (40) to the t-piece (14) and the
other end to the water inlet of the filter (37) (see image 14).
– Connect one end of the cold water hose (26) to the water outlet of
the filter (41) and the other end to the cold water inlet of the
pressure safety valve (23) (see image 15).
If you do not use a filter:
– Connect one end of the cold water hose (26) to the t-piece (14)
and the other end to the cold water inlet of the pressure safety
valve (23) (see image 16).
9 Connect the boiler.
If you install the solo configuration:
– Connect the cold water inlet of the boiler (1) to the cold water
outlet of the pressure safety valve (18) (see image 17). NOTICE!
The cold water inlet of the boiler (1) bears a blue label.
If you install the combi configuration:
– Connect the cold water inlet of the boiler (1) to the cold water
outlet of the mixing valve (31) (see image 18). NOTICE! The cold
water inlet of the boiler (1) bears a blue label.
10 Connect the boiling water.
If you install the solo configuration:
– Connect the boiling water outlet of the boiler (2) to the boiling
water inlet of the tap (10) (see image 19). NOTICE! The boiling
water outlet of the boiler (2) bears a red label. The boiling water
inlet of the tap (10) bears a red label.
If you install the combi configuration:
– Connect the boiling water outlet of the boiler (2) to one end of the
extension hose (35). Connect the other end of the extension hose
(35) to the boiling water inlet of the mixing valve (27 or 28) (see
image 20). NOTICE! The boiling water outlet of the boiler (2) bears
a red label. The boiling water inlet) of the mixing valve (27 or 28) is
indicated with “H”.
– Connect the boiling water inlet of the tap (10) to the boiling water
outlet of the mixing valve (27 or 28) (see image 21). NOTICE! The
boiling water inlet of the tap (10) bears a red label. The boiling
water outlet of the mixing valve (27 or 28) is indicated with “H”.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG GYB00816ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG GYB00816ST in the language / languages: English, German, Dutch, French, Norwegian as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info