697599
16
Zoom out
Zoom in
Previous page
1/28
Next page
Fehlersuche /
D
Fehlersuche
Symptom Ursache Abhilfe
Die Scheiben sind schräg
oder ungleichmäßig.
Das Lebensmittel wiegt wenig und springt
während des Schneidens.
Geben Sie das Lebensmittel in die Einfüllönung.
Legen Sie den kleinen/großen Schieber auf das
Lebensmittel, und drücken Sie den Schieber
herunter. Beginnen Sie mit der Verarbeitung.
Lebensmittelreste auf der
Scheibe nach der Verarbei-
tung.
Es ist normal, dass kleinere Lebensmittelstücke
nach der Verarbeitung zurückbleiben.
Lebensmittelreste immer von der Scheibe en-
tfernen.
Der Motor verlangsamt sich
während des Betriebs.
Die Teigmenge überschreitet möglicherweise die
maximale Füllmenge.
Den Teig entfernen und in zwei Portionen auft-
eilen.
Der Teig ist möglicherweise zu feucht und klebt
daher am Schüsselrand.
Mehr Mehl hinzugeben, jeweils 1 Teelöel bis der Mo-
tor wieder beschleunigt. Solange weiterverarbeiten,
bis sich der Teig vom Rand der Schüssel gelöst hat.
Der Motor treibt das S-Mess-
er nur langsam an.
Die Fleischmenge überschreitet möglicherweise
die maximale Füllmenge.
Das Fleisch entfernen und in zwei Portionen
aufteilen.
Der Fettanteil des Fleisches ist zu hoch. Für optimale Ergebnisse den Fettrand vom
Fleisch noch vor der Verarbeitung entfernen.
Der Motor funktioniert nicht. Ein Sperrschalter verhindert den Motorstart, falls
dieser nicht ordnungsgemäß montiert ist.
Sicherstellen, dass Schüssel und Deckel fest eingerastet
sind. Stellen Sie sicher, dass der große Schieber korrekt
auf der großen Einfüllönung platziert ist.
Das Gerät ist nicht an einer Steckdose ange-
schlossen.
Das Gerät vor Betrieb an eine Steckdose an-
schließen.
Die Küchenmaschine schaltet
sich während des Betriebs
aus.
Der Deckel hat sich möglicherweise gelockert. Sicherstellen, dass der Deckel fest eingerastet ist.
Die Küchenmaschine vibriert
oder bewegt sich während
des Betriebs.
Die Gummifüße sind nass. Sicherstellen, dass die Gummifüße auf der Gerä-
teunterseite sauber und trocken sind.
Dies ist normal bei schweren Lebensmitteln (z. B.
Teig oder Käse).
Lebensmittel entfernen und in zwei Portionen
aufteilen.
16
Επίλυση προβλημάτων
Σύμπτωμα Αιτία Αντιμετώπιση
Οι φέτες είναι λοξές ή
ακανόνιστες.
Τα τρόφιμα είναι ελαφριά, χοροπηδούν κατά τον
τεμαχισμό.
Τοποθετήστε την τροφή στο στόμιο πλήρωσης.
Τοποθετήστε το μεγάλο/μικρό εξάρτημα ώθησης πάνω
από την τροφή και πιέστε. Και ξεκινήστε τη λειτουργία.
Παρέμεινε μικρή ποσότητα
από τα τρόφιμα στο δίσκο
μετά την επεξεργασία.
Είναι φυσιολογικό να παραμένουν μικρά
κομμάτια μετά την επεξεργασία.
Καθαρίστε τυχόν κομμάτια από τα τρόφιμα που
έχουν μπλοκαριστεί στο δίσκο κοπής μόνοι σας.
Ο κινητήρας μειώνει
ταχύτητα κατά τη διάρκεια
της λειτουργίας.
Η ποσότητα της ζύμης ενδέχεται να υπερβαίνει
τη μέγιστη ποσότητα για επεξεργασία.
Αφαιρέστε τη μισή ποσότητα και επεξεργαστείτε
την σε δύο δόσεις.
Η ζύμη ενδέχεται να είναι πολύ υγρή, κολλάει στις
πλευρές του μπολ.
Προσθέστε περισσότερο αλεύρι, 1 κουταλιά της
σούπας τη φορά έως ότου αυξηθεί η ταχύτητα
του κινητήρα. Επεξεργαστείτε τη ζύμη έως ότου
καθαρίσει τις πλευρές του μπολ.
Ο κινητήρας αργεί να
ξεκινήσει με τη λεπίδα S.
Η ποσότητα του κρέατος ενδέχεται να υπερβαίνει
τη δυνατότητα επεξεργασίας.
Αφαιρέστε το κρέας και επεξεργαστείτε το σε
δύο δόσεις.
Υπάρχει πολύ λίπος στο κρέας. Μην ξεχνάτε ότι για να έχετε τα καλύτερα δυνατά
αποτελέσματα πρέπει να αφαιρείτε το λίπος από
το κρέας πριν από την επεξεργασία.
Ο κινητήρας δεν λειτουργεί. Υπάρχει ένας διακόπτης κλειδώματος ασφαλείας
που εμποδίζει την έναρξη του κινητήρα αν δεν
έχει συναρμολογηθεί σωστά.
Βεβαιωθείτε ότι το μπολ επεξεργασίας και το καπάκι
έχουν ασφαλίσει σωστά στη θέση τους. Βεβαιωθείτε
ότι το μεγάλο εξάρτημα ώθησης είναι σωστά
τοποθετημένο στο μεγάλο σωλήνα τροφοδοσίας.
Η συσκευή δεν έχει συνδεθεί στην πρίζα. Βεβαιωθείτε ότι έχετε συνδέσει τη συσκευή στην
πρίζα πριν από τη λειτουργία.
Το μπλέντερ απενεργοποιείται
κατά τη διάρκεια της λειτουργίας.
Ενδέχεται να έχει απασφαλιστεί το καπάκι. Βεβαιωθείτε ότι είναι ασφαλισμένο σωστά στη
θέση του.
Το μπλέντερ δονείται/
κινείται κατά τη διάρκεια της
λειτουργίας.
Τα ελαστικά πέλματα είναι υγρά. Βεβαιωθείτε ότι τα ελαστικά πέλματα στο κάτω
μέρος της μονάδας είναι καθαρά και στεγνά.
Αυτό είναι φυσιολογικό για βαριά φορτία (π.χ.
βαριά ζύμη, τυρί).
Αφαιρέστε τη μισή ποσότητα και επεξεργαστείτε
την σε δύο δόσεις.
GR
Επίλυση προβλημάτων
F
NL
FP9300_Premium_FoodProcessor_AEG.indd 16 2016-02-24 09:10:15
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG FP9300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG FP9300 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info