10
5. Press the ok start button: the option is memorised.
6. For each option it is necessary to repeat the setting from point 2.
7. To exit from menu, press option selection button.
If a programme has been set:
- press ok start button and close the door: the programme will
start automatically.
If a programme has not been set:
- press direction buttons until is displayed the desired washing
programme
- press ok start button and close the door: the programme will
start automatically.
The options can only be set before the start of a washing
programme.
Once set, these options will remain activated for the following
cycles, until they will be deactivated, except for DELAY START
Operating instructions
MENU SUBMENU
LANGUAGE Allows you to view messages that appear in the display
in the required language. (Factory setting: english).
WATER Allows you to set electronically the water softener
HARDNESS according to the hardness of the local area water:
water hardness is measured in 10 levels.
RINSE AID Allows you to deactivate or activate the rinse aid
dosage:
-ONrinse aid dosage activated,
-OFFrinse aid dosage deactivated.
SOUND Allows you to adjust the volume of the alarm signals
VOLUME and of the end of programme signal (from 0 to 5).
Level 0 means the deactivation of the volume of all
signals and the symbol appears in the display.
BRIGHTNESS Allows you to increase or decrease the brightness of the
background of the display, 10 different levels can be
selected.
(this option can
be selected ONLY
with the 3 in 1
function active)