557669
50
Zoom out
Zoom in
Previous page
1/52
Next page
FAVORIT 88080 VIL
Dishwasher
Instruction book
PERFEKT IN FORM UND FUNKTION
152957 27/0en 16-02-2005 17:50 Pagina 1
2
Dear customer,
Please read this User Information carefully and keep it to refer to at a
later date.
Pass it on to any subsequent owner of the appliance.
The following symbols are used in the text:
Safety instructions
Warning! Notes that concern your personal safety.
Attention! Notes that show how to avoid damage to the appliance.
Useful tips and hints
Environmental information
Your dishwasher has the new washing system ”IMPULSE WASHING”.
With this dishwashing system the motor speed and spray pressure
are varied during the wash cycle to achieve better cleaning of the
dishes. It is for this reason that the noise level varies during the
dishwashing cycle.
152957 27/0en 16-02-2005 17:50 Pagina 2
CONTENTS
Operating instructions 4
Safety instructions 4
Disposal 6
Economical and ecological dishwashing 6
Description of the appliance 7
The control panel 8
First use 12
Prior to using for the first time 13
The water softener 13
Filling with dishwasher salt 15
Rinse aid 16
In daily use 18
Loading cutlery and dishes 18
The lower basket 20
Racks for beer glasses 21
The cutlery basket 22
The upper basket 23
Adjusting the height of the upper basket 25
Use of detergent 26
Different kinds of detergent 27
Washing programmes 29
Starting a washing programme 31
Maintenance and cleaning 34
Cleaning the filters 34
What to do, when... 37
Service 40
Guarantee terms 41
Technical specifications 44
Installation instructions 45
Building-in 45
Levelling 45
Fixing to the adjacent units 45
Water supply connections 46
Water inlet hose with safety valve 47
Water outlet hose connection 48
Electrical connection 49
Hints for test centres 50
Contents
3
152957 27/0en 16-02-2005 17:50 Pagina 3
OPERATING INSTRUCTIONS
Safety instructions
The safety of AEG electrical appliances conforms to accepted rules of
technology and the Appliance Safety Act. We as manufacturers,
however, see ourselves as being obliged to familiarise you with the
following safety instructions.
It is most important that this instruction book should be retained
with the appliance for future reference. Should the appliance be
sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with
the appliance in order that the new owner can get to know the
functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety.
You MUST read it carefully before installing or using the
appliance.
Installation
Check your dishwasher for any transport damage. Never connect a
damaged machine. If your dishwasher is damaged, you should
contact your supplier.
For safety reasons it is dangerous to alter the specifications or
attempt to modify this product in any way.
Any electrical and plumbing work required to install this appliance
should be carried out by a qualified and competent person.
Care must be taken to ensure that the appliance does not stand on
the electrical supply cable.
The sides of the dishwasher must never be drilled to prevent
damage to hydraulic components.
Child safety
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the controls or play
with the product.
Packaging parts may be dangerous for children, who could even be
suffocated! You should therefore keep all packaging well away
from children.
Operating instructions
4
152957 27/0en 16-02-2005 17:50 Pagina 4
The water in your dishwasher is not for drinking. Detergent residues
may still be present in your machine. Keep children well away from
your dishwasher when the door is open.
Keep all detergents in a safe place out of children’s reach.
Your dishwasher in day-to-day use
Items that are contaminated by petrol, paint, steel or iron debris,
corrosive, acidic or alkaline chemicals must not be washed in this
dishwasher.
Under no circumstances should you open the door whilst the
appliance is in operation, especially during the washing phase, hot
water may escape. However, if the door is opened, a safety device
ensures that the machine stops.
Only use products (detergent, salt and rinse aid) specifically
designed for use in dishwashers.
Long bladed knives stored in an upright position are a potential
hazard.
Long and/or sharp items of cutlery such as carving knives must be
positioned horizontally in the upper basket.
Ensure that the door of the dishwasher is always closed when it is
not being loaded or unloaded. In this way you will avoid anybody
tripping over the open door and hurting themeselves.
When finishing loading or unloading close the door, as an open
door can be a hazard.
Do not sit or stand on the open door.
Isolate the appliance from the power supply and turn off the water
supply after use.
This product should be serviced by an authorised service engineer,
and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the machine
yourself. Repairs carried out by inexperienced persons may cause
injury or serious malfunctioning. Contact your local Service Force
Centre. Always insist on genuine spare parts.
Operating instructions
5
152957 27/0en 16-02-2005 17:50 Pagina 5
Disposal
Dispose of the dishwasher packaging material correctly.
All packaging materials can be recycled.
Plastic parts are marked with standard international abbreviations:
>PE< for polyethylene, e.g. sheet wrapping material.
>PS< for polystyrene, e.g. padding material (always CFC-free).
>POM< for polyoxymethylene, e.g. plastic clips.
Cardboard packaging is manufactured from recycled paper and should
be deposited in the waste paper collection for recycling.
As and when you cease to use your dishwasher and withdraw it from
service, your should render it unserviceable before having it disposed of.
Warning! Children at play could lock themselves in your dishwasher or
otherwise endanger their lives. Therefore cut off the power supply
cable and make the door closing device unusable to prevent children
from being trapped inside.
For the disposing of the appliance please take it to a recycling centre
or to your dealer who may, for a small contribution to the costs,
dispose it for you.
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or
the shop where you purchased the product.
Economical and ecological dishwashing
Ensure that the water softener is correctly adjusted.
Do not pre-wash under running water.
Select the wash programme to suit the nature and degree of the
soiling on the dishes.
Do not use more detergent, special salt and rinse aid than is
recommended in these operating instructions and by the
manufacturer of the respective product.
Operating instructions
6
152957 27/0en 16-02-2005 17:50 Pagina 6
Operating instructions
7
Description of the appliance
1. Upper basket stop
2. Water hardness dial
3. Salt container
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
NOTE: this dishwasher has an
internal light that turns on and off
when the opening and closing of the
dishwasher’s door occurs.
In case that this light has to be
replaced, please contact your local
Service Force Centre.
IN153
152957 27/0en 16-02-2005 17:50 Pagina 7
Operating instructions
8
“Direction” buttons: these 2 buttons have a double function:
- selecting within the Programmes menu
- selecting within the Options menu and the submenu.
“Ok start“ button: is necessary for:
- confirm / memorise any option,
- start a washing programme.
NOTE: the ok start and option selection buttons, if pressed
simultaneously have the RESET function.
This function allows to:
- cancel a washing programme in progress
It is also possible to return to the factory setting for the following
options:
LANGUAGE (factory setting: english).
BRIGHTNESS (factory setting: level 10).
In setting mode press for about 6 seconds these two buttons
simultaneously.
On/Off button
DIRECTION buttons
OK START button
OPTION selection button
The control panel
Display
152957 27/0en 16-02-2005 17:50 Pagina 8
Operating instructions
9
Option selection button: allows you to enter a menu of options
with relative submenu, press again to exit from menu.
How to set the several options:
1. Press the option selection button.
2. Press the direction buttons until the desired option is displayed:
- DELAY START
- 3 IN 1
- SETTINGS . . .
3. Press the ok start button to select the option.
4. Press the direction buttons until the selection of the desired
submenu is displayed.
MENU SUBMENU
DELAY START Allows the start of the washing programme to be
delayed from 1 hour up to 19 hours.
3 -IN- 1 Sets the dishwasher for the use of conventional,
concentrated detergents or combi detergents (3in1).
-ON
function activated; allows the use of the 3in1 combi
detergents, which incorporate detergent, rinse aid and
salt functions.
The symbol appears in the display.
With the activation of this function, the rinse aid
dispenser and salt container are automatically
deactivated and consequently also the display
indications for the refilling of salt and rinse aid
are deactivated.
-OFF
- for conventional, alkaline detergents with caustic
components,
- for low alkaline concentrated detergents with
natural enzymes.
SETTINGS . . . allows you to enter another menu of options with
relative submenu (see following table): to set the options it is
necessary to repeat the setting from point 3.
152957 27/0en 16-02-2005 17:50 Pagina 9
10
5. Press the ok start button: the option is memorised.
6. For each option it is necessary to repeat the setting from point 2.
7. To exit from menu, press option selection button.
If a programme has been set:
- press ok start button and close the door: the programme will
start automatically.
If a programme has not been set:
- press direction buttons until is displayed the desired washing
programme
- press ok start button and close the door: the programme will
start automatically.
The options can only be set before the start of a washing
programme.
Once set, these options will remain activated for the following
cycles, until they will be deactivated, except for DELAY START
Operating instructions
MENU SUBMENU
LANGUAGE Allows you to view messages that appear in the display
in the required language. (Factory setting: english).
WATER Allows you to set electronically the water softener
HARDNESS according to the hardness of the local area water:
water hardness is measured in 10 levels.
RINSE AID Allows you to deactivate or activate the rinse aid
dosage:
-ONrinse aid dosage activated,
-OFFrinse aid dosage deactivated.
SOUND Allows you to adjust the volume of the alarm signals
VOLUME and of the end of programme signal (from 0 to 5).
Level 0 means the deactivation of the volume of all
signals and the symbol appears in the display.
BRIGHTNESS Allows you to increase or decrease the brightness of the
background of the display, 10 different levels can be
selected.
(this option can
be selected ONLY
with the 3 in 1
function active)
152957 27/0en 16-02-2005 17:50 Pagina 10
Operating instructions
11
The symbols have the following meaning:
Symbols: indicate the various options.
In this row several details are displayed:
- setting mode, guide to the selection of the washing
programmes, duration time of the programme, options,
(when together with the washing programme one or more
options are set, the update of the programme duration will
occur automatically).
- Once the programme has started, indicates the sequence of
the running phases and the running time of the programme in
progress.
Washing phases: during the progress of the programme these
little bars indicate the phases of the washing programme:
prewash, main wash, rinses, drying.
Delay start: fixed in setting mode; flashing when in
progress.
3 in 1 detergent option: is illuminated when the function
for the use of 3 in 1 combi detergents is active.
Exclusion of the volume for alarm and end of programme
audible signals.
Is illuminated when the 70°C Intensive washing programme
is set. This programme makes it possible to thoroughly
disinfect dishes and glasses, such as baby bottles or jam
jars.
152957 27/0en 16-02-2005 17:50 Pagina 11
First use
The first time the dishwasher is switched on, it is possible to select a
different language in which the machine will display the messages.
The factory setting is in english therefore the message LANGUAGE
ENGLISH will appear in the display; the word ENGLISH flashes.
Press the direction buttons until the language required appears in the
display.
To confirm the selection press ok start button.
If, instead of a different language, a washing programme is
immediately set, the dishwasher will memorise the display of the
messages in English.
It will always be possible to select another language another time,
simply follow the instructions given for the setting of the options (see:
"Option selection button").
Operating instructions
12
152957 27/0en 16-02-2005 17:50 Pagina 12
Operating instructions
13
Prior to using for the first time
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply with the
installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill with
dishwasher salt
5. Fill the rinse aid dispenser.
The water softener
The dishwasher is equipped with a water softener designed to remove
minerals and salts from the water supply, which would have a
detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your
water is.
Water hardness is measured in equivalent scales, German degrees,
French degrees and mmol/l (millimol per litre).
The softener should be adjusted according to the hardness of the water
in your area. Your local Water Authority can advise you on the
hardness of the water in your area.
The water softener must be set in both ways: manually, using the water
hardness dial and electronically, using the option selection button:
option WATER HARDNESS.
Adjusting the water
hardness setting
10
9
8
7
6
3
1
no salt
necessary
Manually
Electronically
2
1
2
Water hardness
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
11 - 14 1,9 - 2,5 II
< 4 < 0,7 I
4 - 10 0,7 - 1,8 I/II
19 - 22
15 - 18
3,3 - 3,9
2,6 - 3,2
III
5
4
10
9
8
7
6
3
1
Level
indicated in
the digital
display
3
5
4
°dH
(german
degrees)
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
19 - 25
< 7
7 - 18
33 - 39
26 - 32
°TH
(french degrees)
mmol/l
(millimol per litre,
international unit for
the hardness of water)
Range
152957 27/0en 16-02-2005 17:50 Pagina 13
Operating instructions
14
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory set at
position 2.
b)Setting electronically
NOTE: the electronic setting of the water softener is possible ONLY
with the 3 in 1 function deactivated.
The dishwasher is factory set al level 5.
1. Press the option selection button.
2. Press the direction buttons until SETTING . . . is displayed.
3. Press the ok start button.
4. Press the direction buttons until WATER HARDNESS is displayed.
5. Press the ok start button.
6. Press the direction buttons until the level corresponding to
hardness of the water in your area is displayed.
7. Press the ok start button to confirm the setting.
8. Press the option selection button to exit the Option menu.
AA07
152957 27/0en 16-02-2005 17:50 Pagina 14
Operating instructions
15
Filling with dishwasher salt
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a
dishwasher, especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing
programmes.
This will prevent any grains of salt or salty water, which may have
been spilt, remaining on the bottom of the machine for any period
of time, which may cause corrosion.
To fill:
1. Open the door, remove the lower basket and unscrew the cap of
the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is necessary only
before filling with salt for the first time).
3. Using the funnel provided, pour in the
salt until the container is full.
4. Replace the cap making sure that
there is no trace of salt on the screw
thread or on the gasket.
5. Replace on the cap tightly turning it
clockwise until it stops with a click.
The salt container will require topping up periodically.
The salt refilling is indicated by a flashing message in the display
REFILL SALT.
This occurs only during the setting mode and at the end of the
washing programme, during the progress of the washing programme
the indication for salt refilling is not active.
The salt refilling indication can remain active from 2 to 6 hours
after the salt has been replenished, assuming the dishwasher
remains switched on. If you are using salts that take longer to
dissolve then this can take longer. The function of the machine is
not affected.
Do not worry if water over flows from the unit when filling with salt,
this is quite normal.
SA
LE
Z
O
U
T
S
A
LT
S
A
LZ
S
EL
SR14
152957 27/0en 16-02-2005 17:50 Pagina 15
Operating instructions
16
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, and spot and streak free drying. The dispenser, which
is positioned inside the door, holds about 110 ml of rinse aid, which is
sufficient for 16 - 40 dishwashing programmes, depending upon the
dosage setting.
Filling with rinse aid
1. Open the container by pressing the release button (A).
2. Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by “max”.
Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth
to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers. Never fill the rinse aid
dispenser with any other substances (e.g. dishwasher cleaning
agent, liquid detergent). This would damage the appliance.
152957 27/0en 16-02-2005 17:50 Pagina 16
Operating instructions
17
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of
rinse aid by means of the 6 position selector (position 1 minimum
dosage, position 6 maximum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of
water or lime spots on the dishes after
washing.
Reduce it if there are sticky whitish
streaks on the dishes or a bluish film on
glassware or knife blades.
Top up the rinse aid when REFILL RINSE AID appears in the display.
This occurs only during the setting mode and at the end of the
washing programme, during the progress of the washing programme
the indication for rinse aid refilling is not active.
NOTE: if the drying results are not satisfactory it is possible to activate
only the rinse aid dispenser.
The activation/deactivation of the dosage of rinse aid can only be
possible with the 3 in 1 function active.
Activation/deactivation of the dosage of rinse aid
When the dosage of rinse aid has been activated, also the massage
REFILL RINSE AID is automatically activated
1. Press the option selection button.
2. Press the direction buttons until SETTING . . . is displayed.
3. Press the ok start button.
4. Press the direction buttons until RINSE AID OFF is displayed.
5. Press the ok start button to confirm the deactivation.
6. To actvate the dosage of rinse aid, press the direction buttons
until RINSE AID ON is displayed.
7. Press the ok start button to confirm the setting.
8. Press the option selection button to exit the Option menu.
152957 27/0en 16-02-2005 17:50 Pagina 17
Operating instructions
18
In daily use
Check if it’s necessary to refill with dishwasher salt or rinse aid.
• Load cutlery and dishes into the dishwasher.
• Fill with dishwasher detergent.
• Select a wash programme suitable for the cutlery and dishes.
• Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any object that can absorb water
may not be washed in the dishwasher.
Before loading the dishes, you should:
- Remove large left-overs.
- Soften remnants of burnt food in pans.
When loading the dishes and cutlery, please note:
- Dishes and cutlery must not impede the rotation of the spray arms.
- Load hollow items such as cups, glasses, pans etc, with the opening
downwards so that water cannot collect in the container or a
deep base.
- Dishes and items of cutlery must not lie inside one another, or
cover each other.
- To avoid damage to glasses, they must not touch.
- Lay small objects in the cutlery basket.
Plastic items and pans with teflon have a tendency to retain
water drops; these items will not dry as well as porcelain and steel
items.
152957 27/0en 16-02-2005 17:50 Pagina 18
Operating instructions
19
For washing in the dishwasher the following cutlery/dishes
are not suitable:
Cutlery with wooden, horn, china or
mother-of-pearl handles
Plastic items that are not heat
resistant
Older cutlery with glued parts that is
not temperature resistant
Bonded cutlery items or dishes
Pewter or copper items
Lead crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Only wash stoneware in the dishwasher if it
is specifically marked as being dishwasher-
safe by the manufacturer.
Glazed patterns may fade if machine
washed frequently.
Silver and aluminium parts have a tendency
to discolour during washing. Residues, e.g.
egg white, egg yolk and mustard often
cause discolouring and staining on silver.
Therefore always clean left-overs from silver
immediately, if it is not to be washed
straight after use.
Some types of glass can become dull after a
large number of washes.
are of limited suitability:
152957 27/0en 16-02-2005 17:50 Pagina 19
Operating instructions
20
Open the door and slide out the baskets to load the dishes.
The lower basket
The lower basket is designed to take saucepans, lids, plates, salad
bowls, cutlery etc.
Serving dishes and large lids should be arranged around the edge of
the basket, ensuring that the spray arms can turn freely.
The rows of prongs on the lower basket can be easily lowered to allow
you to load pots, pans and bowls.
UI96
UI88
152957 27/0en 16-02-2005 17:50 Pagina 20
Racks for beer glasses
Can hold up to 4 beer glasses of
different kinds.
For convenience the racks can be folded
upwards.
The support for the beer glass racks,
fitted on the back part of the lower
basket, can be removed and
reassembled easily by sliding them
sideways.
For convenience, two cup racks are supplied and can replace the beer
glass racks.
To remove the racks:
lift and push up from
underneath the fixing
hooks.
To reassemble the racks:
push down from above
the fixing hooks.
Operating instructions
21
152957 27/0en 16-02-2005 17:50 Pagina 21
Operating instructions
22
The cutlery basket
Long bladed knives stored in an upright position are a potential
hazard.
Long and/or sharp items of cutlery such as carving knives must be
positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives must be
placed horizontally in the removable knife basket, which is positioned
at the rear of the upper basket.
Forks and spoons should be placed in the removable cutlery basket
with the handles facing downwards and the knives with their handles
facing upwards.
If the handles protrude from the bottom of the basket, obstructing the
lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
For best results we recommend you
to use the cutlery grid provided (if
the size and dimensions of the
cutlery allow it).
UI71
UI53
152957 27/0en 16-02-2005 17:50 Pagina 22
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner
plates of up to 26 cm in diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water can
reach all surfaces.
For taller items, the cup racks can be folded upwards.
Light items (plastic bowls etc.) must be loaded in the upper basket and
arranged so they do not move.
For glasses with long stems (according to the size and dimensions),
upset the glass holder to the left-hand or right-hand position.
In case you need to load dishes in the upper basket, the glass holder
must be in the right-hand position.
Operating instructions
23
US73
US47
152957 27/0en 16-02-2005 17:50 Pagina 23
Operating instructions
24
In case that plates are loaded in the upper basket:
load them starting from the rear
positions of the basket; tilting
them slightly forwards and
avoiding the front positions near
the door.
Before closing the door, ensure that the spray arms can rotate
freely.
US71
152957 27/0en 16-02-2005 17:50 Pagina 24
Operating instructions
25
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket
after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the mechanism is engaged
and the basket is stable.
Attention!
Never lift or lower the basket on one
side only.
When the basket is in the heigher
position you will not be able to use the
cup rack(s).
The lower the basket to the original position proceed as
follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then allow the mechanism to
drop back down slowly, keeping hold of it.
After loading your machine always close the door, as an open door
can be a hazard.
RC08
With upper basket raised 22 cm 33 cm
With upper basket lowered 26 cm 29 cm
Maximum height of the dishes in:
upper basket lower basket
152957 27/0en 16-02-2005 17:50 Pagina 25
Operating instructions
26
Use of detergent
Only use detergents specifically designed for use in dishwashers.
Using no more then the correct amount of detergent contributes
to reducing pollution.
Please observe the manufacturer’s dosing and storage
recommendations as stated on the detergent packaging.
Fill with detergent
1. If the lid is closed: press release button (1). The lid springs open.
2. Fill the detergent dispenser (2) with detergent.
The marking indicates the dosing levels:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent
3. All programmes with prewash need an additional detergent dose
(5/10 g) that must be placed in the prewash detergent chamber (3).
This detergent will take effect during the prewash phase.
4. Close the lid and press until it locks in place.
DE19
DE22
152957 27/0en 16-02-2005 17:50 Pagina 26
Operating instructions
27
Different kinds of detergent
Detergent tablets
Detergent tablets of different brands dissolve at different speeds. For
this reason some detergent tablets cannot dissolve and develop their
full cleaning power during short programmes. Therefore please use
long programmes when using detergent tablets, to ensure the
complete removal of detergent residuals.
Do not place the tablets in the tub or in the cutlery basket as this
will result in poorer wash results. The tablets should be placed in
the detergent dispenser.
Concentrated detergent
Based on their chemical composition, dishwasher detergents can be
split into two basic types:
- conventional, alkaline detergents with caustic components.
- low alkaline concentrated detergents with natural enzymes.
The use of 50°C washing programmes in conjunction with
concentrated detergents reduces pollution and is good for your dishes;
these wash programmes are specially matched to the dirt-dissolving
properties of the enzymes in the concentrated detergent. For this
reason 50°C wash programmes in which concentrated detergents are
used can achieve the same results that can otherwise only be achieved
using 65°C programmes.
Combi detergents
If you are using dishwasher detergent that includes the rinse aid
function, this must be placed in the detergent compartment.
In this case the rinse aid dispenser must be empty, in order to avoid a
double dosage.
If in the rinse aid dispenser there is still rinse aid you must wait until it
has finished before using these kind of detergents.
The message REFILL RINSE AID will always appear when the machine is
switched on.
Special salt for dishwasher
must still be used.
152957 27/0en 16-02-2005 17:50 Pagina 27
Operating instructions
28
Use of "3 in 1" combi detergents
General advice
These products are detergents with integrated and combined
detergent/rinse-aid and salt functions.
1. Before using these products you should first check that the
water hardness in your supply is compatible with the use of
these products as per the detergent manufacturers (on the
product packaging).
2. These products should be strictly used according to the detergent
manufacturers instructions.
3. If you encounter problems when using 3 in 1 products for the first
time then please contact the detergent manufacturers care line
(the telephone number is given on the product packaging).
Special advice
When using combination 3 in 1 products, we recommend the use of
the “3 in 1” function.
If you decide to turn back to the use of the standard detergent system
we advise that you:
Refill both the salt container and rinse aid dispenser.
Switch the water hardness setting to the highest possible position
and run from 1 to 3 normal washing programmes without a load.
Readjust the water hardness setting again according to the
hardness of the water in your area.
152957 27/0en 16-02-2005 17:50 Pagina 28
Operating instructions
29
Washing programmes
Programme
30 MINUTES
1
Crockery and
cutlery
Fresh soil
30
- - -
0,8 9
45° GLASS
Delicate china,
delicate crockery
and glassware
Normal soil
65
-
75
-
0,8
-
0,9
14
-
16
AUTOMATIC
Crockery, cutlery,
pots and pans
Normal/fresh soil
92
-
115
1/2x
1,10
-
1,50
12
-
25
65° NORMAL
Crockery and
cutlery
Normal soil
95
-
105
1,3
-
1,5
19
-
21
70° INTENSIVE
Crockery, cutlery,
pots and pans
Heavy soil
120
-
130
2x
1,7
-
1,9
23
-
25
ENERGY
2
Crockery and
cutlery
Normal soil
155
-
165
0,95
-
1,05
13
-
15
50° NORMAL
Crockery and
cutlery
Normal soil
90
-
100
1,0
-
1,1
14
-
16
PREWASH
Any. Partial load
(to be completed
later inthe day)
This programme does not
require the use of
detergent
12
- - - -
0,1 4
Type of
load
Degree of
soil
Consumption
values
3
Cycle
description
Pre-rinse
Main wash
Intermediate
Final rinse
Drying
Duration (minutes)
Energy (kWh)
Water (litres)
152957 27/0en 16-02-2005 17:50 Pagina 29
Operating instructions
30
(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).
Characterised by a short duration.
This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish
to load breakfast and dinner crockery and cutlery.
(2) Testing programme for EN 50242 (see "Hints for Test Centres). This programme, developed for the
use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the
same cleaning results that would otherwise be obtained only with the 65°C programmes and
conventional detergents. To compensate the lower temperature, the duration of washing and
drying have been extended.
(3) The consumption values are intended as a guide and depends on the pressure and the temperature of
the water and also by the variations of the power supply.
"AUTOMATIC" washing programme
During the "AUTOMATIC" washing programme the amount of soil on the dishes is determined by how
cloudy the water is.
If the appliance is partially loaded and the dishes lightly soiled, the "prewash", "main wash", and "rinse"
phases of the programme are shorter and the water consumption level is lower.
If the appliance is fully loaded and the dishes heavily soiled, the "prewash"", main wash", and "rinse"
phases of the programme are longer and the water consumption level is higher.
For this reason the programme duration, water and energy consumption levels can vary within the stated
range for AUTOMATIC programme (see "Washing programmes chart").
During the "AUTOMATIC" programme the temperature of the main wash water is also automatically
adjusted between 50°C and 65°C depending on the amount of soil on the dishes.
152957 27/0en 16-02-2005 17:50 Pagina 30
Operating instructions
31
Starting a washing programme
In this fully integrated appliance the controls are located on the top of
the door. When selecting a programme, the door needs to be slightly
open.
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Press the On/Off button
4. Setting and starting the programme
a) Press the direction buttons until the name of the desired
programme is displayed (see "Washing programmes" chart for
the selection of the washing programme).
The details concerning the set programme (programme name,
duration, etc...) are displayed.
Select, if desired, options (see “How to set options”).
Press the ok start button.
Close the door, the set programme will start automatically.
b) If the "delay start" has been set,
the countdown will start automatically and will decrease with
steps of 1 hour. Only in the last hour the decrease will occur
from minute to minute.
Opening the door will not modify or interrupt the countdown.
Once the delay start has elapsed the programme will start
automatically.
Once the washing programme has started, a point-shaped optical
signal appears on the floor beneath the dishwasher’s door.
This optical signal will remain illuminated for all the duration of
the washing programme.
If the appliance has been installed higher up with a furniture door
mounted flush, the optical signal will be no longer visible.
152957 27/0en 16-02-2005 17:50 Pagina 31
Operating instructions
32
5. To interrupt a wash programme in progress
Interrupt a wash programme in progress ONLY if
it’s absolutely necessary
Attention! Hot steam may escape when the door is opened.
Open the door carefully.
Open the dishwasher door; the programme will stop.
The message PLEASE CLOSE DOOR is displayed.
Close the door, the programme will start from the point at which
it was interrupted.
6. To cancel a programme or a delay start in
progress
Open the dishwasher’s door.
Attention! Hot steam may escape when the door is opened.
Open the door carefully.
The message PLEASE CLOSE DOOR is displayed.
Press simultaneously both ok start and option buttons.
The message CONFIRM CANCEL? appears in the display.
Press the ok start button.
The dishwasher returns to setting mode and the message
CHOOSE PROGRAMME is displayed.
If a delay start is cancelled, also the set programme will be
cancelled. In this case the washing programme has to be set again.
(If a new washing programme will be selected, check that there is
detergent in the detergent dispenser).
152957 27/0en 16-02-2005 17:50 Pagina 32
Operating instructions
33
7. End of the washing programme
The dishwasher will automatically stop and an audible signal
informs you of the end of the washing programme.
When the washing programme has ended, the optical signal on
the floor beneath the dishwasher’s door will turn off. Open the
dishwasher door only when this optical signal turns off.
If the door is not immediately opened at the end of the
programme, air will circulate inside the dishwasher to prevent
residual steam recondensing on the dishes as water droplets.
This device operates intermittently for about 20 minutes, as
long as the dishwasher is switched on.
If the On/Off button is pressed or the door is opened during these
20 minutes, the device will be automatically cancelled.
Hot steam may escape from the appliance when opening the door
immediately after the end of the programme, therefore, open the
door carefully.
The message END OF PROGRAMME alternated with PLEASE
SWITCH OFF is displayed.
In case refilling with salt and/or rinse aid is necessary, the message
PLEASE SWITCH OFF is replaced with the salt and rinse aid
refilling messages. If refilling is postponed, it is possible, however,
to switch off the appliance.
Switch off the dishwasher by pressing the On/Off button.
8. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should therefore be
allowed to cool down before removing from the appliance.
Empty the lower basket first and then the upper one; this will
avoid water dripping from the upper basket onto the dishes in the
lower one.
Water may appear on the sides and the door of the dishwasher as
the stainless steel will eventually become cooler then the dishes.
When the washing programme has finished, it is recommended
that the dishwasher is unplugged and the water tap turned off.
152957 27/0en 16-02-2005 17:50 Pagina 33
Operating instructions
35
4. Take hold of the coarse filter (A) by the handle with the hole and
remove from the microfilter (B).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (C) from the base of the washing
compartment and clean both faces thoroughly.
7. Put the flat filter (C) back in the base of the washing compartment.
8. Place the coarse filter (A) in the microfilter (B) and press together.
9. Put the filter combination in place and lock by turning the handle
clockwise to the stop. During this process ensure that the flat filter
does not protrude above the base of the washing compartment.
Attention!
Under no circumstances may the dishwasher be used without filters.
Incorrect repositioning and fitting of the filters will produce poor
washing results.
NEVER try to remove the upper
spray arm.
If residues of soil have clogged the
holes in the upper spray arm,
remove them with a toothpick.
MA40
152957 27/0en 16-02-2005 17:50 Pagina 35
Operating instructions
36
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1. Unplug the appliance and then turn off the water.
2. Leave the door ajar to prevent the formation of any unpleasant
smells.
3. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the temperature is
below 0°C. If this is unavoidable, empty the machine, close the
appliance door, disconnect the water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
152957 27/0en 16-02-2005 17:50 Pagina 36
Operating instructions
37
What to do, when...
Certain problems are due to the lack of simple maintenance or
oversights, which can be solved with the help of the instructions given
here, without calling out an engineer.
...alarm messages or code are displayed
The dishwasher will not start or stops during operation.
The intervention of an alarm is indicated by:
- a continuous sequence of intermittent audible signals,
- the point-shaped optical signal on the floor beneath the
dishwasher’s door is flashing (not visible if the appliance has been
installed higher up with a furniture door mounted flush).
Open the dishwasher’s door, a message or a code (as indicated in the
following chart) is displayed.
Carry out the following suggested corrective actions.
Fault code / Malfunction
- In the display the
message “OPEN THE
TAP” appears
The machine does not fill
with water
The water tap is blocked or
furred with limescale.
The water tap is turned off.
The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked.
Clean out the sink spigot.The sink spigot is blocked.
Check the water drain
hose connection.
Clean the water tap.
Turn the water tap on.
Clean the filter in the
threaded hose fitting.
The water inlet hose has not
been correctly laid or it is
bent or squashed.
Check the water inlet hose
connection.
The water drain hose has not
been correctly laid or it is
bent or squashed.
Possible cause Solutions
- In the display the
messaqge “DRAIN
BLOCKED” appears
The dishwasher will not
drain
Close the water tap and
contact your local Service
Force Centre.
Anti-flood device has
activated.
- In the display the code
appears
152957 27/0en 16-02-2005 17:50 Pagina 37
Operating instructions
38
...there are problems when operating the dishwasher
The programme does not
start
Use a different brand of
detergent.
The whistling is not a cause
for concern.
The dishwasher door has not
been properly closed.
Close the door.
The main plug is not plugged
in.
Insert the mains plug.
The fuse has blown in the
household fuse box.
Replace the fuse.
For dishwasher models with
delay start option:
Delay start has been selected.
If dishes are o be washed
immediately, cancel the
delay start.
There is a whistling noise
during washing
Fault Possible cause Solutions
Once the checks have been carried out, to continue the programme,
press the ok start button and close the door. The programme will
continue from the point at which it was interrupted. If the fault code
reappears contact your local Service Force Centre.
For other combinations of fault codes not described in the above chart
will appear, please contact your local Service Force Centre.
152957 27/0en 16-02-2005 17:50 Pagina 38
Operating instructions
39
...the wash results are not satisfactory
The dishes are not clean
The wrong washing programme has been selected.
The dishes were arranged in such a way as to stop water reaching all
parts of the surface. The baskets must not be overloaded.
The spray arms do not rotate freely due to wrong arrangement of
the load.
The filters in the base of the washing compartment are dirty or
incorrectly positioned.
Too little or no detergent has been used.
Where there are limescale deposits on the dishes; the salt container
is empty or the wrong level of the water softener has been selected.
The drain hose connection is not correct.
The salt container cap is not properly closed.
The dishes are wet and dull
Rinse aid was not used.
The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating on glasses
and dishes
Decrease rinse aid dosing.
Water drops have dried onto glasses and dishes
Increase rinse aid dosing.
The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
152957 27/0en 16-02-2005 17:50 Pagina 39
Service
40
Service
If after all these checks, the problem persists, contact your local
Service Force Centre, quoting the model (Mod.), product number (PNC)
and serial number (S.N.).
This information can be found on the rating plate located on the side
of the dishwasher door (see picture).
So that you always have these numbers
at hand, we recommend you to make a
note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . . .
Service and spare parts
This product should be serviced by an authorised service engineer, and
only genuine spare parts should be used.
Under no circumstances should you attempt to repair the machine
yourself.
Repairs carried out by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service Force Centre.
Always insist on genuine spare parts.
P
r
o
d
.
N
o
.
.
.
.
.
.
.
.
.
S
e
r.
N
o
.
.
.
.
.
.
.
.
.
.
M
o
d
.
.
.
.
.
.
.
.
.
RA07
152957 27/0en 16-02-2005 17:50 Pagina 40
Guarantee terms
41
Guarantee terms (Belgium)
Our appliances are produced with the greatest of care. However, a defect may still occur.
Our consumer services department will repair this upon request, either during or after the
guarantee period. The service life of the appliance will not, however, be reduced as a
result.
This declaration of guarantee terms is based on European Union Directive 99/44/EC and
the provisions of the Civil Code. The statutory rights that the consumer has under this
legislation are not affected by this declaration of guarantee terms.
This declaration does not affect the vendor’s statutory warranty to the end user. The
appliance is guaranteed within the context of and in adherence with the following terms:
1. In accordance with provisions laid down in paragraphs 2 to 15, we will remedy free
of charge any defect that occurs within 24 months from the date the appliance is
delivered to the first end user.
These guarantee terms do not apply in the event of use for professional or equivalent
purposes.
2. Performing the guarantee means that the appliance is returned to the condition it
was in before the defect occurred. Defective parts are replaced or repaired.
Parts replaced free of charge become our property.
3. So as to avoid more severe damage, the defect must be brought to our attention
immediately.
4. Applying the guarantee is subject to the consumer providing proof of purchase
showing the purchase and/or delivery date.
5. The guarantee will not apply if damage caused to delicate parts, such as glass
(vitreous ceramic), synthetic materials and rubber, is the result of inappropriate use.
6. The guarantee cannot be called on for minor faults that do not affect the value or
the overall reliability of the appliance.
7. The statutory warranty does not apply when defects are caused by:
a chemical or electrochemical reaction caused by water,
abnormal environmental conditions in general,
unsuitable operating conditions,
contact with harsh substances.
8. The guarantee does not apply to defects due to transport which have occurred
outside of our responsibility. Nor will the guarantee cover those caused by
inadequate installation or assembly, lack of maintenance or failure to respect the
assembly instructions or directions for use.
9. Defects that result from repairs or measures carried out by people who are not
qualified or expert or defects that result from the addition of non-original
accessories or spare parts are not covered by the guarantee.
152957 27/0en 16-02-2005 17:50 Pagina 41
Guarantee terms
42
10. Appliances that are easy to transport may be delivered or sent to the consumer
services department. Home repairs are only anticipated for bulky appliances or built-
in appliances.
11. If the appliances are built-in, built-under, fixed or suspended in such a way that
removing and replacing them in the place where they are fitted takes more than half
an hour, the costs that result therefrom will be charged for. Connected damage
caused by these removal and replacement operations will be the responsibility of the
user.
12. If, during the guarantee period, repairing the same defect repeatedly is not
conclusive, or if the repair costs are considered disproportionate, in agreement with
the consumer, the defective appliance may be replaced with another appliance of
the same value.
In this event, we reserve the right to ask for a financial contribution calculated
according to the length of time it has been used.
13. A repair under guarantee does not mean that the normal guarantee period will be
extended nor that a new guarantee period begins.
14. We give a twelve month guarantee for repairs, limited to the same defect.
15. Except in the event where liability is legally imposed, this declaration of guarantee
terms excludes any compensation for damage outside the appliance for which the
consumer wishes to assert his rights. In the event of legally admitted liability,
compensation will not exceed the purchase price paid for the appliance.
These guarantee terms are only valid for appliances purchased and used in Belgium. For
exported appliances, the user must first make sure that they satisfy the technical
conditions (e.g.: voltage, frequency, installation instructions, type of gas, etc.) for the
country concerned and that they can withstand the local climatic and environmental
conditions. For appliances purchased abroad, the user must first ensure that they meet
the qualifications required in Belgium. Non-essential or requested adjustments are not
covered by the guarantee and are not possible in all cases.
Our consumer services department is always at your disposal, even after the guarantee
period has expired.
152957 27/0en 16-02-2005 17:50 Pagina 42
Guarantee terms
43
Address for our consumer services department:
Electrolux Home Products Belgium
ELECTROLUX SERVICE
Bergensesteenweg, 719
1502 Lembeek
Consumer services
Telephone
02/363.04.44
Telefax
02/363.04.00
02/363.04.60
consumer.services@electrolux.be
repairs.belgium@electrolux.be
152957 27/0en 16-02-2005 17:50 Pagina 43
Operating instructions
44
Dimensions:
Electrical connection:
Voltage
Overall power
Fuse
Water supply pressure:
Capacity:
Width 59.6 cm
Height 86.8 - 94.8 cm
Max depth 55.5 cm
Max depth with open door 119 cm
Information on the electrical connection is given on the
rating plate on the inner edge of the dishwasher’s door.
Minimum 50 kPa (0.5 bar)
Maximum 800 kPa (8 bar)
12 place settings
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent
modifications.
Technical specifications
152957 27/0en 16-02-2005 17:50 Pagina 44
Installation instructions
45
Installation instructions
Any electrical and/or plumbing work required to install this
appliance should be carried out by a qualified electrician and/or
plumber or competent person.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a drain.
Building-in
This dishwasher is designed to be fitted under a kitchen counter or
worksurface.
Attention!
Carefully follow the instructions on the enclosed template for
building in the dishwasher and fitting the furniture panel.
No further openings for the venting of the dishwasher are required,
but only to let the water fill and drain hose and power supply cable
pass through.
The dishwasher incorporates adjustable feet to allow the adjustment of
the height.
During all operations that involve accessibility to internal components
the dishwasher has to be unplugged.
When inserting the machine, ensure that the water inlet hose, the
drain hose and the supply cable are not kinked or squashed.
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on
either side of the cabinet.
If the door does not close correctly, loosen or tighten the adjustable
feet until the machine is perfectly level.
Fixing to the adjacent units
The dishwasher must be secured against tilting.
Therefore make sure that the counter it is fixed under, is suitably
secured to a fixed structure (adjacent kitchen units cabinets, wall).
152957 27/0en 16-02-2005 17:50 Pagina 45
Installation instructions
46
Water supply connections
This dishwasher may be fed with either hot (max. 60°) or cold water.
Nevertheless we advise you a cold water supply.
A hot water supply is not always efficient with very soiled crockery as
it shortens the washing programmes a lot.
For making the connection itself, the coupling nut fitted to the
machine’s supply hose is designed to screw onto either a 3/4" inch
gas thread spout or to a purpose made quick-coupling tap such as
the Press-block.
The water pressure must be within the limits given in the "Technical
specifications". Your local Water Authority will advise you on the
average mains pressure in your area.
The water inlet hose must not be kinked, crushed, or entangled when
it is being connected up.
The dishwasher features fill and drain hoses which can be turned
either to the left or the right to suit the installation by means of the
locknut. The locknut must be correctly fitted to avoid water leaks.
(Attention! NOT all models of dishwashers have fill and drain hoses
provided with locknut. In this case, this kind of facility is not
possible).
If the machine is connected to new pipes or pipes which have not
been used for a long time, you should run the water for a few
minutes before connecting the inlet hose.
Do not use, for connection, old hoses which have been used in
another appliance.
The dishwasher is fitted with safety devices that prevent the wash
water returning into the drinking water system and comply with the
applicable plumbing regulations.
152957 27/0en 16-02-2005 17:50 Pagina 46
Installation instructions
47
Water inlet hose with safety valve
After connecting the double-walled water inlet hose, the safety valve
is next to the tap. Therefore the water inlet hose is only under pressure
while the water is running. If the water inlet hose starts to leak during
this operation, the safety valve cuts off the running water.
Please take care when installing the water inlet hose:
- The electrical cable for the safety valve is in the double-walled
water inlet hose. Do not immerse the water inlet hose or the safety
valve in water.
- If water inlet hose or the safety valve is damaged, remove the mains
plug immediately.
- A water inlet hose with safety valve must only be replaced by a
specialist or by the consumer services department.
- Place the water inlet hose in such a way that it is never higher than
the bottom edge of the safety valve.
152957 27/0en 16-02-2005 17:50 Pagina 47
Installation instructions
48
Water outlet hose connection
The end of the drain hose can be connected in the following ways:
1. To the sink outlet spigot, securing it to the underside of the work
surface. This will prevent waste water from the sink running into the
machine.
2. Hooked over the edge of the sink using the special curved plastic
guide (if provided with the machine).
3. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
The drain hose can face either to the right or left of the dishwasher
Ensure the hose is not bent or squashed as this could prevent or slow
down the discharge of water.
The sink plug must not be in place when the machine is draining as
this could cause the water to syphon back into the machine.
If you use a drain hose extension it must be no longer than 2 metres
and its internal diameter must be no smaller than the diameter of the
hose provided.
Likewise the internal diameter of the couplings used for connections
to the waste outlet must be no smaller than the diameter of the hose
provided.
Attention!
Our appliances are supplied with a security device to protect against
the return of dirty water back into the machine.
If the spigot of your sink has a "no return valve" incorporated this can
prevent the correct draining of your dishwasher.
We advise you therefore to remove it.
CS18
152957 27/0en 16-02-2005 17:50 Pagina 48
Installation instructions
49
Electrical connection
Information concerning the electrical connection is given on the
rating plate on the edge of the dishwasher’s door.
Before plugging the appliance into the wall socket, make sure that:
1. The mains voltage and current rating at the site of installation
match the nominal voltage and current rating given on the rating
plate.
2. The meter, fuses, mains power supply and wall socket can all take
the maximum load required. Make sure that the socket and plug are
compatible without having to use any type of adaptor. If necessary,
have the domestic wiring system socket replaced.
To isolate the dishwasher from mains, remove the mains plug.
Important!
The plug must still be accessible after the appliance has been
installed.
In case that the electrical cable has to be replaced, please contact
your local consumer services department.
The appliance should not be connected to the electrical supply by
means of an extension cable.
Safety standards require the appliance to be earthed.
The manufacture accepts no liability for failure to observe the
above safety precautions.
152957 27/0en 16-02-2005 17:50 Pagina 49
Hints for test centres
50
Hints for test centres
Testing in accordance with EN 60704 must be carried out with
appliance fully loaded and using the test programme (see "Washing
programmes" chart).
Test in accordance with EN 50242 must be carried out when the salt
dispenser and rinse aid container have been filled with salt and rinse
aid respectively and using the test programme (see "Washing
programmes" chart).
Arrangement cutlery
basket
Arrangement knife basket
Cup racks: position A
Arrangement lower basket
Arrangement upper basket
(take off the glass holder)
Load:
Rinse aid setting
Detergent dosage:
Position 4 (type III)
5 g + 25 g (type B)
12 standard place settings
152957 27/0en 16-02-2005 17:50 Pagina 50
152957 27/0en 16-02-2005 17:50 Pagina 51
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
© Copyright by AEG
152 957 27/0
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain
saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries
around the world.
Subject to change without notice
02/05
152957 27/0en 16-02-2005 17:50 Pagina 52
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG F88080VIL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG F88080VIL in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG F88080VIL

AEG F88080VIL User Manual - German - 56 pages

AEG F88080VIL User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info