342804
12
Zoom out
Zoom in
Previous page
1/30
Next page
12
dement au réseau électrique, l’appareil reprend l’état dans lequel il était
avant la coupure de l’alimentation.
En cas d’absence prolongée ou de non-utilisation:
1. Débranchez l’appareil, à cet effet appuyez sur la touche MARCHE/ARRET
jusqu'à ce que l'affichage s'éteigne (voir ci-dessus).
2. Videz l’appareil et débranchez la fiche secteur ou déconnectez ou dévissez
le fusible.
3. Dégivrez et nettoyez l'appareil (voir section «Nettoyage et entretien»).
4. Maintenez les portes entrouvertes pendant tout la durée de non-utilisation
afin d'éviter la formation de mauvaises odeurs.
Compartiment ccongélateur
Si vous devez congeler des aliments
immédiatement après l'installation
ou après une interruption prolongée
de l'appareil, appuyer sur le bouton (I)
et le faire fonctionner vide pendant
au moins 4 heures avant d'y intro-
duire les aliments.
Si le congélateur fonctionne déjà
avec des aliments à l'intérieur, appuy-
er sur le bouton (I) 24 heures avant
le début de la congélation.
La congélation doit durer 24 heures,
ensuite, vous devrez tourner le bou-
ton sur une position intermédiaire.
Les produits à congeler seront mis
dans le compartiment de congélation
rapide et, lorsque la congélation est
terminée, ils seront distribués dans les
différents paniers.
Vous avez la possibilité de congeler
jusqu’à un maximum de 13 kg/24
heures. Ne dépassez jamais cette
quantité en une seule fois.
49
Toets om het alarm uit te schakelen
Een abnormale verhoging van de temperatuur in de diepvries (bijv. uitval-
len van de elektriciteit) wordt aangeduid door het knipperen van het con-
trolelampje (F) en door een geluidsignaal.
Wanneer de normale omstandigheden hersteld worden, gaat het geluidsa-
larm uit, terwijl het alarmcontrolelampje blijft knipperen.
Door op alarmtoets (G) te drukken, verschijnt op de aanduiding (D) gedu-
rende enkele seconden de hoogste temperatuur die in de diepvriezer ont-
staan is.
Apparaat uitschakelen
Om uit te schakelen toets AAN/UIT ca. 5 seconden ingedrukt houden. In de
temperatuurindicatie begint een "count down", daarbij wordt van "3" naar
"1" teruggeteld. Bij bereiken van "1" schakelt de koelruimte uit. De tempe-
ratuurindicatie gaat uit.
Aanwijzing:
De instelling van het apparaat kan niet veranderd worden, als de stekker uit
het stopcontact getrokken is of als er anderszins geen elektriciteit aanwezig
is. Na aansluiting op het elektriciteitsnet start het apparaat weer op de stand
waar het voor de stroomonderbreking op stond.
Als het apparaat gedurende langere tijd niet gebruikt wordt:
1. Apparaat uitschakelen door toets ON/OFF in te drukken tot de indicatie uit-
gaat (zie boven).
2. Stekker uit het stopcontact halen of zekering uitschakelen, er resp. uithalen.
3. Vriesvak ontdooien en apparaat grondig reinigen (zie hoofdstuk "Reiniging
en onderhoud").
4. Daarna de deuren open laten staan om reukvorming te voorkomen.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux santo z 71990 4 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux santo z 71990 4 i in the language / languages: Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info