32
Switching off the appliance
☞
1. To switch off the appliance, turn the temperature regulator to position
"0". The inside light goes out.
If the appliance is not going to be used for an extended period:
☞
1. Switch off the appliance by turning the temperature regulator to posi-
tion "0". The inside light goes out.
2. Remove the mains plug or switch off or disconnect from the electricity
supply.
3. Clean thoroughly (see section: “Cleaning and Maintenance”).
4. Leave the door open to avoid the build up of odours.
Recommended settings:
Examples:
3. If you want a higher or lower temperature, turn the temperature regu-
lator to a warmer or cooler setting respectively.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold set-
ting on the temperature regulator (position"5" to "6") can cause the
compressor to run continuously.
Reason: when the ambient temperature is high, the compressor must
run continuously to maintain the low temperature in the appliance.
The fridge will not be able to defrost since automatic defrosting of the
fridge is only possible when the compressor is not running (see also
"Defrosting" section). The result is the build up of a thick layer of frost
on the fridge rear wall.
If this happens, turn the temperature regulator back to a warmer set-
ting (position “4” to “5”). At this setting the compressor will be
switched on and off as usual and automatic defrosting recommenced.
Ambient temperature Temperature controller position
Approx. 10°C Range up to 1
Range about 2
Approx. 25°C Range about 2
Approx. 32°C 2 to 3
Approx. 38°C 1 to 2
Approx. 16°C
