111226
18
Zoom out
Zoom in
Previous page
1/128
Next page
g
18
0 Press button (Figure 2/F).
The grinding procedure will start auto-
matically at the set time. At the start
time the green indicator for
button will go out and the red
indicator next to the button
(Figure 2/B) will be illuminated. Once
the coffee has been ground, the water
supply swings back automatically to
the brewing position and brewing be-
gins.
3
As long as the red indicator next to
button (Bild 2/B) is on, only the
button will work.
3
If, once pre-programmed, the start
time, number of cups and coffee
strength are not to be changed you
need only press the button to
activate the „Auto“ function.
6 Preparing coffee in
advance of your setting
If the appliance is pre-programmed
using the “Auto” function (the green
indicator for the button is illu-
minated to indicate „Auto“ function
activated), but you would like some
coffee before the start time, then you
must switch off the „Auto“ function
with the button (Figure 2/F).
The green lamp goes out. Start coffee
preparation in normal mode with the
button (Figure 2/B). Grinding
and brewing will begin at once.
1
Note when preparing coffee with
beans: Coffee preparation takes place
with the settings in normal mode
(number of cups, coffee strength).
When these differ from the settings for
the „Auto“ function, you must change
the settings accordingly in the normal
mode prior to the start!
7 Deactivating the “Auto”
function
If you have activated the “Auto” func-
tion but do not want the programme
to start, simply press the but-
ton (Figure 2/F). The green indicator
will go off.
8 Switching off
Switch the appliance off with the
button (Figure 2/B).
9 Warming plate (Figure 1/M)
After brewing the warming plate keeps
the coffee in the glass jug warm. Two
hours after brewing the appliance
switches off automatically.
10 Removing the jug
(Figure 15)
When the jug is removed, the anti-drip
valve prevents dripping.
11 Cleaning
(It is imperative that these
instructions are observed!)
11.1 Coffee part
The filter insert can be removed for
emptying and cleaning.
0 Swing out the swivel filter.
0 Place your finger in the rear handle
recess (Figure 16) and pull the bracket
up.
This unlocks the filter insert and it can
be removed for cleaning.
0 Activate the anti-drip valve several
times during cleaning.
0 After cleaning the filter insert, fit the
swivel filter. Reposition the bracket
(Figure 17).
The filter insert is now relocked. Please
check that it is positioned and locked
correctly!
0 Only clean the appliance using a damp
cloth; never immerse it in water. Only
the coffee jug and jug lid are dish-
washer safe.
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
822_949_330 KAM200.book Seite 18 Donnerstag, 17. Januar 2008 9:49 21
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux KAM 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux KAM 200 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info