111226
17
Zoom out
Zoom in
Previous page
1/128
Next page
g
17
0 Button (Figure 2/C) is for
selecting the aroma setting (symbol
lights).
0 Pressing the button again
changes between the number of cups
and , the aroma setting remains
on.
0 To cancel the aroma setting, press
button (Figure 2/G), the symbol
will go out and the number of
cups lights.
5.1 Preparing coffee instantane-
ously (Normal mode)
0 Pour in water (Item 1.2).
0 Swing out the swivel filter (Figure 1/B).
0 Insert filter paper (Item 1.3).
0 Swing the swivel filter back.
0 Place coffee jug on the warming plate
(Item 1.4).
0 Swing out the water supply (Figure
1/D) using the swivel lever (Figure 1/H)
until it engages (Figure 13).
0 Set the desired number of cups with
the button (Figure 2/G).
0 Set the desired coffee strength with
the button (Figure 2/D).
0 Where applicable (when preparing a
max. of 4 cups) select the aroma set-
ting with button (Figure 2/C).
Example:
You require e.g.: 4 cups: medium
strength, with aroma setting
– the display shows:
Press button (Figure 2/B). The
red indicator will come on. Grinding
will begin at once. Once the coffee has
been ground, the water supply swings
back automatically to the brewing
position and brewing begins.
3
As long as the red indicator next to
button (Bild 2/B) is on, only the
button will work.
5.2 Preparing coffee using the
coffee grinder with pre-pro-
gramming of the start time
(„Auto“ function)
0 Pour in water (Item 1.2).
0 Swing out the swivel filter (Figure 1/B).
0 Insert filter paper (Item 1.3).
0 Swing the swivel filter back.
0 Place coffee jug on the warming plate
(Item 1.4).
0 Swing out the water supply (Figure
1/D) using the swivel lever (Figure 1/H)
until it engages (Figure 13).
Programming the „Auto“function:
0 Press button (Figure 2/K).
The green lamp next to the
button (Figure 2/F) flashes. The
following settings must be made whilst
the green lamp is flashing.
3
If the green lamp has already ceased to
flash before the settings are com-
pleted, press button (Figure 2/F)
again and continue with the program-
ming.
0 Set the desired start time with the
buttons (Figure 2/E) and
(Figure 2/J).
0 Set the desired number of cups with
the button (Figure 2/G).
0 Set the desired coffee strength with
the button (Figure 2/D).
0 Where applicable (when preparing a
max. of 4 cups) select the aroma set-
ting with button (Figure 2/C).
Example:
You require e.g.: Start 08.00 hours,
4 cups, medium strength, with aroma
setting
– the display shows:
The green lamp ceases to flash ca.
3 seconds after the last button actua-
tion. This indicates that the settings are
saved. The display once again shows the
time and the settings in normal mode.
2-4
2-4
2-10
2-10
2-4
PROG
AUTO
AUTO
H MIN
2-10
2-4
822_949_330 KAM200.book Seite 17 Donnerstag, 17. Januar 2008 9:49 21
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux KAM 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux KAM 200 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info