132933
7
Zoom out
Zoom in
Previous page
1/68
Next page
7
EN
HOOD BODY MOUNTING
Firstly, it is necessary to adjust the two Vr-screws
of the 11a-brackets, at minimun (B).
Hang the hood body on the two brackets 11a.
Connect the hood to the mains supply by means
of a bipolar switch with at least 3 mm contact
gap.
see Part USE to open the upper panel
Remove the metal lters by using the handles
In order to align the hood it is necessary to
adjust the Vr-screws from inside the hood.
Fasten the safety screw 11.
Fit again the metal lters into their seats and
see Part USE to close the upper panel.
Disconnect the hood from the mains supply.
Attention: If any barrier occurs in its way during
the panel opening or closing, the upper panel stops
for 1 sec and starts again the other way round. If
within 5 sec the panel does not open or close, the
motor stops. Press the key once again.
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the
hood to the chimney using either a exible or rigid
pipe ø 150 or 120mm, the choice of which is left
to the installer.
To install a ø 150
To install the dumper 10
Fix the pipe in position using sufcient pipe
clamps (not supplied).
To install a ø 120
To install a ø 120 mm air exhaust connection,
insert the reducer ange 9 on the dumper 10.
Fix the pipe in position using sufcient pipe
clamps (not supplied)
.• Remove any activated charcoal lters.








7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux dd 9996 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux dd 9996 in the language / languages: Dutch as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info