132933
6
Zoom out
Zoom in
Previous page
1/68
Next page
6
EN
INSTALLATION
Wall drilling and bracket xing
As a rst step, proceed with the following drawings:
a vertical line up to the ceiling or up to the upper limit, at the centre of the area in which the hood
is to be tted;
a horizontal line at a minimum 960 mm above the cooker top.
Mark a point (1) on the horizontal line, 292 mm to the right of the vertical reference line.
Repeat this operation on the other side, checking that the two marks are levelled.
Mark a reference point (2) as indicated at 200 mm from the vertical reference line and 458 mm
above the cooker top.
Repeat this operation on the other side, checking that the two marks are levelled.
Mark a reference point (3) at 743 mm above the cooker top on the vertical reference line.
Drill at the marked points (1), using a ø 12 mm drill bit.
Drill at the marked points (2) and (3), using a ø 8 mm drill bit.
Insert the bracket plugs 11a into the holes (1) and tighten the screws.
Insert plug 11 into holes (2) and (3).
Place bracket 7.2.1 on the wall, about 1-2 mm from the ceiling or from the upper limit, aligning
the centre (notch) with the vertical reference line.
Mark the wall at the centres of the bracket holes.
Place the bracket 7.2.1 on the wall at X mm below the rst bracket (X = height of the upper chim-
ney section), aligning the centre (notch) with the vertical line.
Mark the wall at the centres of the bracket holes.
Drill ø 8 mm holes at all the marked centre points.
Insert the wall plugs 11 in the holes.
Fix the brackets using the 12a screws (4,2 x 44,4) supplied with the hood.






 







6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux dd 9996 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux dd 9996 in the language / languages: Dutch as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info