361354
44
Zoom out
Zoom in
Previous page
1/132
Next page
g
44
15.8 Ordering Accessories
To ensure years of satisfaction with
your coffee machine and prevent
faults arising, it is very important to
regularly clean and descale the coffee
machine. The original cleaning tablets
and descalant are obtainable direct
from us.
If you live in Germany, please call our
Order Hotline
Tel. 0 18 01-20 30 90.
16 What do I do, if ...
... coffee-making is interrupted and
the "Fill water tank" indicator (Fig. 3,
k) flashes?
The water tank is empty. Fill the
water tank and press the key or
the key again.
The water tank is not properly
inserted. Check that the water tank
is properly seated.
The coffee is ground too finely.
Clean the coffee-making unit and
adjust the grinding texture.
The coffee-making unit is blocked.
Refer to „Cleaning the Coffee-mak-
ing Unit" page 41. Completely
remove any encrusted coffee
remains from the coffee-making
unit, set a smaller coffee quantity.
... the "Fill water tank" indicator (Fig.
3, k) flashes, even though it is
sufficiently filled with water?
Vent the coffee machine: Place a
container under the hot water noz-
zle. Then turn the Selection dial for
steam and hot water (Fig. 1, D) for a
few seconds to position . As
soon as water is ejected, turn the
selection dial back to position .
... the coffee machine does not oper-
ate, and the "Empty grounds con-
tainer" indicator (Fig. 3, j)
flashes?
Container is full: Empty container
and clean thoroughly; see „Emptying
the Coffee Grounds Container“
page 40.
... the coffee machine does not oper-
ate, and all 5 indicator lights Coffee
Quantity and or are flash-
ing?
The coffee-making unit is overfilled.
Refer to „Cleaning the Coffee-mak-
ing Unit" page 41. Completely
remove any encrusted coffee
remains from the coffee-making
unit.
Reduce the amount of ground cof-
fee spooned in.
Set a small coffee quantity; see
„Changing and Saving the Coffee
Quantity“ page 38.
–Check ejector.
If you are unable to remedy the
fault, please contact the AEG Ser-
viceline.
... "Clean" key (Fig. 3, f) is
flashing?
Number of coffees dispensed
necessitates cleaning: Run cleaning
program; see „Running the Cleaning
Program“ page 42.
... the cleaning program cannot be
started?
Turn the bean container to the pow-
der setting, then start the cleaning
program.
... "Descale" key (Fig. 3, e) is
flashing?
Number of coffees dispensed
necessitates descaling: Carry out
descaling: see „Running the
Descaling Program“ page 42.
... the espresso/coffee is not hot
enough?
Preheat the cups with hot water.
Increase coffee temperature; see
„Setting the Coffee Temperature
page 38.
... the espresso/coffee is too weak?
Not enough ground coffee. Increase
the amount of ground coffee, max. 2
measuring spoons.
The coffee bean container is empty.
Add coffee beans.
The coffee quantity is set too low.
822_949_318 CP2..._defnep.book Seite 44 Freitag, 2. November 2007 6:30 18
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux cp 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux cp 2200 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info