Manual Aeg-electrolux cp 2200 (page 41 of 132) (English, German, Dutch, French, Portuguese, Spanish)

361354

Zoom out

Zoom in

1/132

0 To do this, proceed as follows (Fig. 24):

1. Push the Release catch for removing

grinding ring (Fig. 2, T) forward toward

the centre of the grinder.

2. Keep it in this position and turn the

Lever for setting grinding texture (Fig.

2, U) approximately one full turn

clockwise until it comes up against the

stop.

You can continue to turn the Lever for

setting grinding texture (Fig. 2, U) only

if the Release catch for removing

grinding ring (Fig. 2, T) is pressed.

0 Now release the grinding ring (Fig. 25)

and remove the foreign body or bodies.

Caution! Risk of injury from the spin-

ning grinder. Never switch the coffee

machine on, when you are working on

the grinder. This can lead to severe

injuries. Before starting work, ensure

that the machine is unplugged from

the mains socket.

When refitting the grinding ring,

ensure that both catches on the grind-

ing ring holder engage in the corre-

sponding slots (Fig. 25).

Failure to do this can lead to damage

to the grinder.

0 Turn the Lever for setting grinding tex-

ture (Fig. 2, U) approximately one full

turn anticlockwise until it comes up

against the stop.

0 Set the bean container in place at the

"UnlockContainer" position , and

turn it back to the "Coffee Beans" posi-

tion .

0 Add a small quantity of coffee beans,

and test the proper operation of the

grinder by making a cup of coffee. The

first time the grinder is used, or after

cleaning, less ground coffee will enter

the coffee-making unit, because the

channel first has to be filled. This can

influence the first cup of coffee.

15.5 Cleaning the Coffee-making Unit

We advise you to clean the coffee-

making unit regularly (depending on

how frequently it is used). It should be

cleaned before you start the cleaning

program. If your coffee machine is to

be left unused for some time (e.g. holi-

days), empty the coffee grounds con-

tainer and the water tank, and

thoroughly clean the coffee machine,

including the coffee-making unit.

Removing the coffee-making unit

0 Switch the coffee machine off with the

"On/Off" key (Fig. 3, h) . Wait until

the coffee machine has reverted to the

standby position and the automatic

rinsing has ended. Then unplug from

the mains socket.

0 Pull the coffee grounds container com-

pletely out of the coffee machine

(Fig. 26).

0 Press the Service cover release button

(Fig. 2, S) (Fig. 27).

The service cover opens at the front

(Fig. 28).

0 Remove the service cover.

The coffee-making unit is located

behind the service cover (Fig. 29). The

three red elements are used for latch-

ing and unlatching.

0 To remove the coffee-making unit,

operate the latches in the following

order (Fig. 30):

1. Push the latching lever up.

2. Press and hold the lock button.

3. Press and hold the latching button

down and pull out the coffee-making

unit (Fig. 31).

Cleaning the coffee-making unit

0 To clear coarse particles (contamina-

tion) from the coffee-making unit, pull

the red service lever down to the stop

and open the coffee-making unit

(Fig. 32).

The two strainers and now readily

accessible, and the ejector lever drops

down.

0 Rinse the coffee-making unit under

warm, running water. It is essential to

thoroughly flush the stainless steel

strainers to remove all coffee residues

(Fig. 33 and 34).

0 Dry the coffee-making unit off and

push the service lever back up to the

stop (Fig. 35).

822_949_318 CP2..._defnep.book Seite 41 Freitag, 2. November 2007 6:30 18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux cp 2200 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeg-electrolux cp 2200 Manual

Product: