Manual AEG DDLE LCD 27 (page 22 of 100) (English, German, Dutch, French, Polish)

648345

Zoom out

Zoom in

1/100

Installation - for qualied contractors

9.2 Water installation

◦ A safety valve is not required.

» Flush the water line thoroughly.

» Ensure that the ow rate (see chapter “Specication /

Data table”, On) for switching on the appliance is

achieved. If the ow rate is not achieved, remove the

ow limiter (see chapter “Installation / Removing the

ow limiter”).

» Increase the mains water pressure if the required

ow rate is not achieved with the draw-off valve fully

opened.

Taps

Use appropriate pressure taps. Open taps are not per-

mitted.

Note

Never use the shut-off valve in the cold water inlet

to reduce the ow rate. It is intended to shut off the

appliance.

Permissible water pipe materials

◦ Cold water inlet pipe:

Galvanised steel pipe, stainless steel pipe, copper

pipe or plastic pipe

◦ DHW outlet pipe:

Stainless steel pipe, copper pipe or plastic pipe

Material losses

If plastic pipework systems are used, take into ac-

count the maximum inlet temperature and the max-

imum pressure (see chapter “Specication / Data

table”).

Flexible water connection lines

» If the appliance is installed with exible water con-

nection lines, ensure that the bayonet ttings of

the pipe bends do not become twisted inside the

appliance.

» Secure the back panel at the bottom with two addi-

tional screws.

10. Installation

10.1 Standard installation

◦ Electrical connection from above; installation on un-

nished walls

◦ Water connection, installation on unnished walls

◦ DDLE LCD 18/21/24: Connected load 21 kW preset

For further installation options, see chapter “Installation

alternatives”:

◦ Electrical connection from below on unnished walls

◦ Electrical connection for nished walls

◦ Connecting a load shedding relay

◦ Undersink installation, water connections – from

above

◦ Water installation for nished walls

◦ Operation with preheated water

◦ Temperature limit

Opening the appliance

D0000041615

» Open the appliance by releasing the snap lock.

T-

26_02_02_0762

» Remove the back panel by pressing the two locking

hooks and pulling the lower part of the back panel

forwards.

Preparing the power cable

160

≥ 30

26_02_02_0887

Fitting the wall mounting bracket

26_02_02_0972

» Mark out the holes for drilling with the installation

template. If the appliance is to be installed with water

connections on nished walls, also mark out the x-

ing holes on the lower part of the template.

» Drill the holes and secure the wall mounting bracket

with 2 screws and 2 rawl plugs (screws and rawl

plugs are part of the standard delivery).

» Fit the threaded stud provided.

» Mount the wall mounting bracket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG DDLE LCD 27 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 28,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG DDLE LCD 27 Manual

Product: