458667

AEG DBS 5533 Manual

30
Zoom out
Zoom in
Previous page
1/54
Next page
English
30
Instructions
Unpacking
• Remove any protective foils and stickers from the
soleplate.
• Please unwind the lead completely.
• Use the cable holder to guide the connecting hose
(2).
Electrical connection
• Make sure that the iron voltage (see name plate) and
the line voltage match.
• The mains plug should only be inserted into a cor-
rectly installed 230 V ~ 50 Hz socket with earthing
contact.
Connected Wattage
• The station has a total maximum wattage of 2100 W.
With this connected load a separate supply line
protected by a 16 A household circuit breaker is
recommended.
CAUTION: OVERLOAD!
• If you use extension leads, these should have a
cable cross-section of at least 1.5 mm
2
.
• Do not use any multiple sockets, as this device is
too powerful.
Temperature Control on the Iron
The symbols on the control correspond to the following
settings:
• (Synthetics, silk) low temperature
• • (Wool ) medium temperature
• • • (Cotton, linen) highest temperature
Water Tank (8)
• In order to  ll the water tank, push the lock (9) open
and use the funnel supplied.
• The tank volume is 1.4 litres.
Water
Please use only distilled water. Do not  ll battery water,
water from the clothes dryer and water containing
additives (such as starch, perfume, softener or other
chemicals) into the water reservoir. This could damage
the iron due to residues forming in the steam chamber.
These residues may cause impurities to the fabric when
dropping out of the holes in the soleplate.
Operation
Before Initial Use
• Clean the ironing base with a slightly damp cloth.
• In order to remove all residues before initial use,
please pass the iron a few times over an old clean
cloth.
Ironing without steam
ޥ NOTE:
• Sort out the garments according to their ironing
temperatures.
• Always set the temperature control to „0“ before
connecting the appliance to a power point, or
before disconnecting it.
• Place the iron on the rest (7).
• Only connect the machine to a properly installed
safety socket, 230 V/50 Hz.
• Set the temperature on the temperature control (1).
If you have sensitive items to iron, please begin with
the lowest temperature.
ޥ NOTE:
The control lamp (11) on the iron shows that it is
heating up. As soon as the control lamp goes o the
operating temperature has been reached. Now you can
start ironing.
• Always turn the temperature control to „0“ after use
and remove the mains plug (the control lamp in the
handle goes o ).
Steam Ironing
WARNING:
The iron expels a large quantity of hot steam. Danger
of burns.
CAUTION:
When using the steam iron please ensure that the wa-
ter tank is always  lled to the required level. Operating
the device without water will damage it.
05-DBS 5533.indd 3005-DBS 5533.indd 30 09.02.2009 11:36:57 Uhr09.02.2009 11:36:57 Uhr
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DBS 5533 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DBS 5533 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info