561377

AEG DB1150 Manual

14
Zoom out
Zoom in
Previous page
1/48
Next page
g
14
Cleaning
As a precaution we recommend clean-
ing every three months.
0 Unplug from the mains.
0 Set the steam selector (Figure 1/F) to
position
„“ (Figure 4/A).
0 Fill the water reservoir (Figure 1/O)
with clear water to the “MAX” mark.
0 Set the temperature selector
(Figure 1/N) to “MAX”.
0 Insert the plug into the socket.
0 Wait until the power indicator
(Figure 1/J) goes out.
0 Set the steam selector (Figure 1/F) to
position (Figure 4/C).
0 Place the appliance horizontally over a
sink.
0 Press the steam selector (Figure 1/F) for
at least 1 minute.
Water is flowing out of the steam exit
holes. Your steam iron is now ready for
use again.
What to do, if ...
• no “steam” appears when using on a
steam setting?
– In warm, dry air (during the winter),
reduced amounts of vapour are nor-
mal because it is absorbed by the dry
air before condensing.
– Emptying the filled water reservoir
can wash out fluff. Remove the
mains cord and tip the filled appli-
ance forwards at an angle (Figure 7)
so that the water can run out of the
filling aperture.
• drops of water are coming out of the
steam exit holes?
– Do not set the steam selector to
another position than
„“ until the
temperature for steam ironing has
been reached. If the temperature has
been set too low for steam ironing
increase the setting.
• stains appear on the washing while
ironing?
– Clean the steam iron. Rub the sole-
plate while still warm with a mixture
of water and vinegar or with a non-
abrasive cleaning agent.
– When dry ironing fluff can enter the
steam chambers and carbonise. This
can lead to stains as the water
passes through. Therefore also clean
the inside of the water reservoir. Fill
it with water and gently shake the
steam iron. Then pour the water out.
• the soleplate is rough or furred?
– The iron temperature was set too
high.
– Select the correct ironing tempera-
ture for the fabric (see ironing
table).
Disposal
2
Packaging material
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identified
by markings, e.g. >PE<, >PS<, etc.
Please dispose of the packaging mate-
rials in the appropriate container at
the community waste disposal facili-
ties.
2
Old appliance
The symbol
W on the product or on
its packaging indicates that this prod-
uct may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for
the recycling of electrical and elec-
tronic equipment. By ensuring this
product is disposed of correctly, you
will help prevent potential negative
consequences for the environment and
human health, which could otherwise
be caused by inappropriate waste han-
dling of this product. For more detailed
information about recycling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you pur-
chased the product.
822 949 340 DB_1100.book Seite 14 Montag, 28. April 2008 11:51 11
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DB1150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DB1150 in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info