561377

AEG DB1150 Manual

13
Zoom out
Zoom in
Previous page
1/48
Next page
g
13
3
You will obtain optimal steaming
results and the noise produced by the
steaming will be steadier after the
water reservoir has been filled and
drained three times.
Ironing with Steam
To steam iron, set the temperature
selector (Figure 1/N) to the required
fabric type and wait until the power
indicator (Figure 1/J) goes out - only
then set the steam selector (Figure 1/F)
to the desired position (Figure 4/B). You
will find which temperature setting
(fabric type) matches which steam set-
ting in the ironing table. As soon as the
steam iron is held horizontally steam
begins to form. When the steam iron is
set upright again the steam supply
stops automatically.
Spray Function (Figure 6/A)
The first time you use the appliance,
or if you have not used it for a long
time, you will need to press the spray
function button (Figure 1/H) several
times before water comes out of the
spray nozzle (Figure 1/D). You can also
use the spray function when dry iron-
ing.
Super Steam Jet Function
(Figure 6/B)
The super steam jet function is of
valuable assistance when ironing, for
example, creases, embroidery etc. You
can trigger the additional steam jet
both when steam ironing and when dry
ironing.
0 Set the temperature selector
(Figure 1/N) to the “MAX” position and
wait until the correct temperature has
been reached, i.e., until the power indi-
cator (Figure 1/J) goes out.
0 Raise the steam iron a little away from
the material and press the steam jet
button (Figure 1/G).
Always wait another 5 seconds before
pressing the steam jet button again.
Steaming hanging items of
clothing
0 Turn the temperature selector
(Figure 1/N) to the “MAX” position
and wait until the power indicator
(Figure 1/J) goes out.
0 Hang the article concerned on a
hanger and hold the steam iron at
a distance of 10 – 20 cm from the
material.
0 Now press the steam jet button
(Figure 1/G). Wait at least 5 seconds
before pressing the button again.
1
Warning: Do not attempt to freshen
up clothing whilst it is still being worn.
Risk of burning!
Drip Stop
The steam iron has an automatic drip
stop function. The drip stop immedi-
ately interrupts the creation of steam
if the temperature selected is too low.
Storage
Remove the plug from the socket!
Set the temperature selector
(Figure 1/N) to the “Cold” position
(Figure 2/a) and the steam selector
(Figure 1/F) to position
„“ (Figure
„“4/A).
Empty out remaining water (Figure 7).
Store the appliance standing upright.
To store properly wrap the mains cord
around the cord storage (Figures 1/M
and 8).
Care and Maintenance
The steam iron has an automatic decal-
cification feature, which significant
slows down the deposit of limescale in
the steam chamber.
1
The steam iron must not be des-
caled! Neither vinegar nor proprie-
tary brands of descaler must be
filled into the water reservoir!
822 949 340 DB_1100.book Seite 13 Montag, 28. April 2008 11:51 11
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DB1150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DB1150 in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info