Manual AEG BSS 4816 (page 43 of 74) (English, German, Dutch, French, Italian, Polish, Spanish)

546331

Zoom out

Zoom in

1/74

English

Initial Operation

Insert the plug in a duly installed 230 V/50 Hz socket.

1. Switch on your sound source (e.g. DVD player) and start

it.

2. Turn on the subwoofer with the on/off switch on the rear

of the device.

3. Press the STANDBY button (2). You may also turn on the

device by pressing the volume control on the front of the

subwoofer. The light on the volume control will change

from red to blue.

4. Select the desired input source. To do this, press the

INPUT button (3) repeatedly.

NOTE:

• Every time it is switched on the device starts in 2.1

operation.

• The input source “USB” may only be selected with

a connected storage device.

5. Select between the 2.1 and 5.1 operation by pressing the

respective button (17/7).

6. With the VOL +/- button you can set the overall volume.

NOTE:

After about 30 minutes, the device will switch to standby

automatically.

MUTE (8)

This button is used to quickly turn off the volume. The indica-

tor ashes on the display. Press the button again to cancel

the function.

Adjust the volume of the individual speakers

• Use the FR+/- and FL+/- buttons (12) to select the volume

of the front speakers.

• Use the RR+/- and RL+/- buttons (11) to select the vol-

ume of the surround speakers.

• Use the SW+/- buttons (15) to select the volume of the

subwoofers.

• Use the CEN+/- buttons (10) to select the volume of the

center speaker.

NOTE:

• Please note! The surround and centre loudspea-

kers can only be controlled during 5.1 operation.

• When you change the overall volume with the

VOL+/VOL- buttons, the level for the center,

subwoofer, surround, and front loudspeakers will

change as well.

• When you press the RESET button (19), the settings

will be reset to the factory defaults.

Sound setting (5)

Preset equalizer function. Different sound modes are avail-

able. (NORMAL, MUSIC, MOVIE).

NOTE:

Change the EQ setting in your playback device, if neces-

sary, to create an optimal sound.

Turning off

To turn off, switch the POWER button on the back of the unit

to the OFF position.

Radio mode

Scan stations

1. Press the INPUT button (3) repeatedly, until “FM” is

shown in the display.

2. Tune the desired station with the >>/<< buttons. If you

keep one of the buttons pressed, the unit will scan to the

next radio station. The tuned frequency is shown on the

display.

Preset stations

1. Search for a station as described under “Scan stations”.

2. Briey keep the MEMORY CH+ button (1) pressed down.

“P01” ashes on the display.

3. Use the MEMORY CH+/CH- buttons to select the preset

location on which the station is supposed to be stored.

4. Press the MEMORY CH+ button (1) to store the station.

Select preset stations

Select the preset radio station with the MEMORY CH+/CH- (1)

buttons.

Storage media mode

Storage media compatibility

There is a wide range of compression methods as well as vari-

ations in quality between storage media. These unfortunately

do not allow us to guarantee full compatibility. For these

reasons, there may be problems during the music playback

of USB devices. This is not a malfunction of the device.

USB Port (Device side)

1. Directly connect a USB storage medium.

2. Press the INPUT button repeatedly (3), until the notica-

tion “USb” appears in the display. Playback then begins.

For operation, please refer to the “Explanation of the operat-

ing keys” section.

NOTE:

• Always connect a USB storage medium directly to the

USB connection to prevent possible malfunctions.

• The USB connection is not suitable for charging exter-

nal devices.

CAUTION:

Before removing the USB stick, switch to another input

source.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BSS 4816 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 11,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BSS 4816 Manual

Product: